Valkyrie Riders Cruiser Club
March 29, 2026, 07:35:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Print
Author Topic: Been busy working on the bikes  (Read 1510 times)
hotglue #43
Member
*****
Posts: 3151

Ya never know how many good Summers ya have left.


« on: March 07, 2012, 06:21:25 PM »

The new Yellow Valk needed new tires.... the old ones had plenty of tread, but were dated from 2001....Got a new set of Cobras front and back with the bike when I bought it.....  
Put the Yellow on the lift and changed the rear tire out for the new....Went thru the rear end and shaft... All looked GREAT!!!!!
The Black and Silver Valk had a front Cobra in good shape.. so I put it on the Yellow... then put the rim off the Yellow with the new Cobra on the Black and Silver... it will get more miles this year..
.Had a problem here..The lift table is great for rear tire changing... but not so much for front tires.... needed to have the front ends of both Valks in the air at the same time... so I bought another bike lift from Harbor Freight ...
  The good new is.. there is a tire shop in town that will change my tires.. and dispose of the old tire for $12!!!! They can't balance them, but I put Ride-on in and it lines 'em out just fine!
  Took the 11 1/2" 440 rear shocks off the Black and silver... put them on the Yellow.... took the 12" 440"s off the Harley, and put them on the Black and Silver...took the 13" Progressive 418's off the Yellow and put them on the Harley....
  Emptied the fuel on the Yellow and put in fresh with some seafoam....

  Pulled the front brake calipers off the Black and Sliver and went through them and got them working... they were really crappy dirty and hanging up and not working right...
The Yellow is ready to go.... tomorrow will work to put the the brakes back on the Black and Silver... get 'em bled... All the bearings checked out OK on both Valks!!!
  The Harley is ready to go!!!!!

Are ya confused yet???? I am!!!!!!!  Now I need ta start workin' on FB's Spyder.......
  

  
« Last Edit: March 07, 2012, 06:28:51 PM by hotglue #43 » Logged



 blue=3 times
 green=at least 4 times
When they are all 'green'.. I'll stop counting.
Jess from VA
Member
*****
Posts: 31196


No VA


« Reply #1 on: March 07, 2012, 06:30:07 PM »

Are ya confused yet?

No..... but I bet the bikes are.   Grin
Logged
Skinhead
Member
*****
Posts: 8763


J. A. B. O. A.

Troy, MI


« Reply #2 on: March 07, 2012, 06:30:22 PM »

You wasn't sampling that sippin' whiskey/metal polish/paint remover whilst performing your maintenance rituals were you?  That stuff will definitely leave you confused.
Logged


Troy, MI
hotglue #43
Member
*****
Posts: 3151

Ya never know how many good Summers ya have left.


« Reply #3 on: March 07, 2012, 06:38:37 PM »

You wasn't sampling that sippin' whiskey/metal polish/paint remover whilst performing your maintenance rituals were you?  That stuff will definitely leave you confused.
LOL... Nope... but I am partaking now.....It was a Good day in the shop!!!!!  I also helped FB plant some roses... and planted wildflowers on the back side of the hill after tilling the ground..... this retirement stuff is hard on an old feller.... coolsmiley

 Jess.....The bikes will figger it out... LOL
« Last Edit: March 07, 2012, 06:40:43 PM by hotglue #43 » Logged



 blue=3 times
 green=at least 4 times
When they are all 'green'.. I'll stop counting.
junior
Member
*****
Posts: 1427


new hampshire


« Reply #4 on: March 08, 2012, 01:32:37 AM »

what no pics?
Logged

RTaz
Member
*****
Posts: 1319


Michigan...Home of InZane X -XI

Oscoda, Michigan


« Reply #5 on: March 08, 2012, 04:23:15 AM »

 cooldude cooldude cooldude cooldude
 Most of our garage work is done, going to put some fork seals in the red/white next week and putting a light bar on the Green/cream,  we got Devl's Spyder ready to roll and I got a ride in yesterday 65* out took Jack out (my new to me custom blue).
Logged



 RTaz
Westsider
Member
*****
Posts: 716


Fort Worth TX.


« Reply #6 on: March 08, 2012, 04:49:25 AM »

Man you must be exhausted..I really feel sorry for ya,,,,,,, Evil Evil Evil

Those spyders look nice , no problems hopefully?

Logged

we'll be there when we get there -   Valkless,, on lookout....
KY,Dave (AKA Misunderstood)
Member
*****
Posts: 4146


Specimen #30838 DS #0233

Williamsburg, KY


« Reply #7 on: March 08, 2012, 05:28:39 AM »

Yeah I'm confused. Don't confuse the swapping around between the Valks and the spyder.  crazy2
Logged
HayHauler
Member
*****
Posts: 7569


Pearland, TX


« Reply #8 on: March 08, 2012, 06:02:00 AM »

So the yellow is 1.5" shorter, the B&S is .5" taller, and the Harley is 1" taller...  I get it!

Good work day if I say so.

Hay  Cool
Jimmyt

 
Logged

VRCC# 28963
R J
Member
*****
Posts: 13380


DS-0009 ...... # 173

Des Moines, IA


« Reply #9 on: March 08, 2012, 06:55:19 AM »

Mam oh man, and I thought I was busy. cooldude

I was just a holdin da chair down and a watchin TV. tickedoff

That is work to keep goin through da damn index to find a channel & a show I like. Evil

Ma Nature has a been playin with us also.   30's for a few days, then a record tying 74 w/30 to 35  mph wind, then 50's and windy and now today a high of in the upper 30's.

I did get in a short ride on the day it was 74, but that damn wind was a tussle to ride in.   Never tried the 50's day as it was still windy.
Logged

44 Harley ServiCar
 



 

Jack
Member
*****
Posts: 1889


VRCC# 3099, 1999 Valk Standard, 2006 Rocket 3

Benton, Arkansas


« Reply #10 on: March 08, 2012, 07:47:21 AM »

 cooldude
Logged

"It takes a certain kind of nut to ride a motorcycle, and I am that motorcycle nut," Lyle Grimes, RIP August 2009.
KY,Dave (AKA Misunderstood)
Member
*****
Posts: 4146


Specimen #30838 DS #0233

Williamsburg, KY


« Reply #11 on: March 08, 2012, 07:49:26 AM »

So the yellow is 1.5" shorter, the B&S is .5" taller, and the Harley is 1" taller...  I get it!

Good work day if I say so.

Hay  Cool
Jimmyt

 

Show off  Grin
Logged
HayHauler
Member
*****
Posts: 7569


Pearland, TX


« Reply #12 on: March 08, 2012, 10:03:26 AM »

So the yellow is 1.5" shorter, the B&S is .5" taller, and the Harley is 1" taller...  I get it!

Good work day if I say so.

Hay  Cool
Jimmyt

 

Show off  Grin


2funny



Hay  Cool
Jimmyt
Logged

VRCC# 28963
F6BANGER
Member
*****
Posts: 835


Albuquerque NM


« Reply #13 on: March 08, 2012, 10:26:55 AM »

so are you talking the brake fluid out of the yellow and putting it in the black and silver or the harley? or are you taking the brake fluid out of the black and silver and putting it in the harley? or are you taking the black and harley and putting it in the yellow? Im confused 2funny

Logged
T-Bird
Member
*****
Posts: 2487


A friend is one who takes me for what I am.

Cleveland, Tennessee


« Reply #14 on: March 08, 2012, 10:45:11 AM »

Mark, I must have missed a post where you got another Valk. I hope to see it at "GOTF"
                          As they say:
    
« Last Edit: March 08, 2012, 10:49:00 AM by T-Bird » Logged

HayHauler
Member
*****
Posts: 7569


Pearland, TX


« Reply #15 on: March 08, 2012, 11:16:00 AM »

Here ya go T-Bird!

http://www.valkyrieforum.com/bbs/index.php/topic,38911.0.html

Always glad to help.

Hay Cool
Jimmyt
Logged

VRCC# 28963
ataDude #62
Member
*****
Posts: 37


« Reply #16 on: March 08, 2012, 11:35:25 AM »

Did you service the front forks on old yeller? 



The new Yellow Valk needed new tires.... the old ones had plenty of tread, but were dated from 2001....Got a new set of Cobras front and back with the bike when I bought it.....  
Put the Yellow on the lift and changed the rear tire out for the new....Went thru the rear end and shaft... All looked GREAT!!!!!
The Black and Silver Valk had a front Cobra in good shape.. so I put it on the Yellow... then put the rim off the Yellow with the new Cobra on the Black and Silver... it will get more miles this year..
.Had a problem here..The lift table is great for rear tire changing... but not so much for front tires.... needed to have the front ends of both Valks in the air at the same time... so I bought another bike lift from Harbor Freight ...
  The good new is.. there is a tire shop in town that will change my tires.. and dispose of the old tire for $12!!!! They can't balance them, but I put Ride-on in and it lines 'em out just fine!
  Took the 11 1/2" 440 rear shocks off the Black and silver... put them on the Yellow.... took the 12" 440"s off the Harley, and put them on the Black and Silver...took the 13" Progressive 418's off the Yellow and put them on the Harley....
  Emptied the fuel on the Yellow and put in fresh with some seafoam....

  Pulled the front brake calipers off the Black and Sliver and went through them and got them working... they were really crappy dirty and hanging up and not working right...
The Yellow is ready to go.... tomorrow will work to put the the brakes back on the Black and Silver... get 'em bled... All the bearings checked out OK on both Valks!!!
  The Harley is ready to go!!!!!

Are ya confused yet???? I am!!!!!!!  Now I need ta start workin' on FB's Spyder.......
  

  
Logged
hotglue #43
Member
*****
Posts: 3151

Ya never know how many good Summers ya have left.


« Reply #17 on: March 08, 2012, 08:18:17 PM »

Did you service the front forks on old yeller? 



  Haven't tore into that yet.... no signs of a leak.... and the front end seems stable....That will fall under : as it needs to be done...  I did go completely thru the front brakes on the Black and Silver.... rebuilt the calipers, and the master today...and took a ride on the Yellow!!!!!!!  the Yellow had little miss coming into the high speed jets....  may have a little gum in 'em.... put some seafoam in the tank and rode some more.... seems to be lining out!!!!!  Running the bike is probably the best thing I can do for it... Was a good ride!!!! sweet bike!!!!! 
Logged



 blue=3 times
 green=at least 4 times
When they are all 'green'.. I'll stop counting.
hotglue #43
Member
*****
Posts: 3151

Ya never know how many good Summers ya have left.


« Reply #18 on: March 08, 2012, 08:27:15 PM »

So the yellow is 1.5" shorter, the B&S is .5" taller, and the Harley is 1" taller...  I get it!

Good work day if I say so.

Hay  Cool
Jimmyt

 
Jimmy is NOT confused!!!! LOL
Logged



 blue=3 times
 green=at least 4 times
When they are all 'green'.. I'll stop counting.
Pages: [1]   Go Up
Print
Jump to: