Looking for picss of OEM wiring for I/S rear speakers.

[lucky_1_chris]

I'd really appreciate if anyone could send/post up a few pics of the trunk showing where/how Honda ran the to these speakers. Mine are hooked up, but I did it in a hurry last year before a trip and it looks like ass. Just looking for some ideas to clean it up.

Gracias.

[Cattman]

No pictures, but here is how mine are ran. Plug in harness under front seat, run under right side fender rail to under the front of the trunk. Go straight up into the bottom of the right speaker box. Take trunk backrest off and run along outside of the trunk to the left speaker box. Again go through the back bottom of the box to get the wires to the speaker.  Mine are held on with small plastic J hooks that are double side taped to the trunk. Most of the wiring is hidden under the backrest.

[custom1]

I have my seat and passenger seat backrest off to polish the paint on the trunk. If you can wait till this evening I can try to get some pics after work. Probably around 7:00.

[lucky_1_chris]

No pictures, but here is how mine are ran. Plug in harness under front seat, run under right side fender rail to under the front of the trunk. Go straight up into the bottom of the right speaker box. Take trunk backrest off and run along outside of the trunk to the left speaker box. Again go through the back bottom of the box to get the wires to the speaker.  Mine are held on with small plastic J hooks that are double side taped to the trunk. Most of the wiring is hidden under the backrest.

Does it show where the wires enter the speaker pod?

[lucky_1_chris]

I have my seat and passenger seat backrest off to polish the paint on the trunk. If you can wait till this evening I can try to get some pics after work. Probably around 7:00.

I would appreciate that. Thanks.

[custom1]

Ok Hope these help. The wires go in the bottom of the speaker pods. Two holes under the right side one and one hole under the left. The wires come up along the fender rail and are tucked in behind it. The white j hooks look to just be 3M taped on. You can actually see the one on the lower right (left in the pic) with the seat on, and I hadn't even noticed that before. Wires are in a black plastic sleeve and sort of blend in with the surroundings. Don't mind the dirt, as I haven't started cleaning the trunk area yet.









This one has the wire untucked from the fender rail.







With the seat-back on.

[lucky_1_chris]

Thanks y'all.  Helped a lot.