Valkyrie Riders Cruiser Club
August 20, 2025, 01:31:50 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: turn signal maintenance------  (Read 1041 times)
JerryH
Member
*****
Posts: 139


« on: March 27, 2012, 09:54:17 AM »

I need to take apart the turn signal assembly to clean and relube.  I've done the starter  button maintenance and parts replacement before.  Should I expect any problems/issues when taking apart the turn signal switch?   Don't want any parts to go shooting across the garage.

TIA

Jerry
Logged
N0tac0p
Member
*****
Posts: 413



« Reply #1 on: March 27, 2012, 10:51:36 AM »

depends on if you have the signal cancellation from kizan tech.  gotta be carfull of the centering springs
Logged
olddog1946
Member
*****
Posts: 1830


Moses Lake, Wa


« Reply #2 on: March 27, 2012, 11:34:18 AM »

I didn't even take mine apart...sprayed with contact cleaner til it ran out on the ground, worked the switch back and forth awhile, then sprayed some WD-40 in it..and it's been working fine since. May not last as long as taking it apart and putting in the proper lube, but no worries about things flying about.
Logged

VRCC # 32473
US AIR FORCE E7, Retired 1965-1988
01 Valk Std.
02 BMW k1200LTE
65 Chevelle coupe, 1986 Mazda RX-7 with 350/5spd, 1983 Mazda RX-7 with FOMOCO 302/AOD project, 95 Mustang GT Convertible 5.0, 5 spd
Moses Lake, Wa.   509-760-6382 if you need help
JerryH
Member
*****
Posts: 139


« Reply #3 on: March 27, 2012, 03:31:43 PM »

thanks olddog1946  --  sounds like the quick and easy route to take.

Jerry
Logged
BF
Member
*****
Posts: 9932


Fort Walton Beach, Florida I'm a simple man, I like pretty, dark haired woman and breakfast food.


« Reply #4 on: March 27, 2012, 03:50:22 PM »

Parts will not fly out.  It's a very simple thing to take it apart, spray out the old junk grease with contact cleaner and relube with dielectric grease.  If you don't have any, you can find little packets of it at places like AutoZone. 
Logged

I can't help about the shape I'm in
I can't sing, I ain't pretty and my legs are thin
But don't ask me what I think of you
I might not give the answer that you want me to
 

WamegoRob
Member
*****
Posts: 731


Wamego, KS


« Reply #5 on: March 27, 2012, 09:34:01 PM »

Just two nights ago I went out to the garage with the intent of opening the case and spraying it down with WD-40 just to loosen up the sticky switch a bit.
I'm glad I couldn't help myself and ended up completely overhauling the switch... and by "completely overhauling" I mean removing the ONE screw that holds it all together and giving all the pieces a good cleaning.

Ahh, it feels so brand new I even signaled my lane changes on the ride to work Smiley

Lesson?  Don't half-ass it.. you'll be happy in the end.
Logged
Moonshot_1
Member
*****
Posts: 5118


Me and my Valk at Freedom Rock


« Reply #6 on: March 27, 2012, 09:40:31 PM »

I didn't even take mine apart...sprayed with contact cleaner til it ran out on the ground, worked the switch back and forth awhile, then sprayed some WD-40 in it..and it's been working fine since. May not last as long as taking it apart and putting in the proper lube, but no worries about things flying about.

+1 on this solution. Worked great for me. Like new. Did it about year and a half ago. Still working like a charm.
Logged

Mike Luken 
 

Cherokee, Ia.
Former Iowa Patriot Guard Ride Captain
madmaxinde
Member
*****
Posts: 9


Trier, Germany


« Reply #7 on: March 27, 2012, 11:59:16 PM »

Ditto on taking it apart and cleaning it, did that a few weeks ago, and presto, it works like new.
Logged

Keep the shiny side up Bro
VRCC # 33008
Pages: [1]   Go Up
Send this topic Print
Jump to: