Valkyrie Riders Cruiser Club
August 17, 2025, 02:21:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: Kury foodpegs  (Read 854 times)
PhredValk
Member
*****
Posts: 1531


Edmonton, Alberta, Canada


« on: July 08, 2012, 03:26:55 PM »

So I finally get time to install my Kury foot-pegs. Remove the left peg mount (easier than the right side), get it all apart to find the stock hinge-pin won't go thru the holes in the adapters. Took a half hour to get it back on so I can ride to the hardware store (once you figure out the spring it's easier). Had to get a pin, some washers and cotter pins. Just a warning...

Yopu can see the hinge-pin is way too long, but it has several holes for the cotter pin, and can be cut off.
Fred.
Logged

Growing old is mandatory, growing up is optional.
VRCCDS0237
X Ring
Member
*****
Posts: 3626


VRCC #27389, VRCCDS #204

The Landmass Between Mobile And New Orleans


« Reply #1 on: July 08, 2012, 07:13:49 PM »

You do things the hard way don't you?  Bolt, 2 washers and a lock nut replaces the pin and cotter pin.

Marty
Logged

People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           
PhredValk
Member
*****
Posts: 1531


Edmonton, Alberta, Canada


« Reply #2 on: July 09, 2012, 06:00:53 AM »

I like the hard way, and the new pin is way shinier than the old one. I would have had to go to the hardware store for bolts and lock nuts anyway...
Fred.
Logged

Growing old is mandatory, growing up is optional.
VRCCDS0237
DLSSOJC
Member
*****
Posts: 118



« Reply #3 on: July 09, 2012, 10:03:20 AM »

I just reused the stock pins and washers, and everything worked perfectly!  cooldude
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: