Valkyrie Riders Cruiser Club
August 16, 2025, 11:25:35 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > install modulator w/o drilling bucket?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: install modulator w/o drilling bucket?  (Read 781 times)
westsidevalk
Member
*****
Posts: 153


West Springfield, MA
« on: July 21, 2012, 08:00:04 PM »
I did a search and I did not notice if anyone had installed a Kisan headlight modulator without drilling a hole in the bucket for the daytime sensor. I know the daytime sensor has to be outside the bucket but was wondering if it can be run through the back of the bucket and dangle out there?

Thanks.
Logged
X Ring
Member
*****
Posts: 3626


VRCC #27389, VRCCDS #204

The Landmass Between Mobile And New Orleans
« Reply #1 on: July 21, 2012, 08:32:49 PM »
The sensor needs to point up.  I ran mine out the back of the bucket and zip tied it to the wires running up to the right hand switchbox.

Marty
Logged
People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           
Mr.BubblesVRCCDS0008
Member
*****
Posts: 3025

Huffman, Texas close to Houston
« Reply #2 on: July 21, 2012, 10:31:48 PM »
I have a signal dynamic modulator and  mine said the sensor should be pointed down and at least 18 inches from the ground. My is zip tied to the bottom of the triple tree.
Logged
gordonv
Member
*****
Posts: 5763


VRCC # 31419

Richmond BC
« Reply #3 on: July 22, 2012, 01:04:45 AM »
If there is room out the back of the bucket, then you're good.

Mine said either pointing straight up or down was all right.

I have found pointing up, that after sun up and before sun down and hour or 2, and it doesn't work.
Logged
1999 Black with custom paint IS
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS