Valkyrie Riders Cruiser Club
August 16, 2025, 10:05:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Kill Button....No Response
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Kill Button....No Response  (Read 891 times)
shavdog
Member
*****
Posts: 55

Walker, Minnesota
« on: July 24, 2012, 05:05:11 AM »
On my 98 std....I push the red kill button on the handle bar...nothing happens...seems dead...I use to key to shut off but would like my kill button to work....looking for ideas where to look..thanks...craig
Logged
Chrisj CMA
Member
*****
Posts: 14805


Crestview (Panhandle) Florida
« Reply #1 on: July 24, 2012, 05:38:36 AM »
Spray some WD-40 in and around the red switch and then function it many many times......that should fix it
Logged
sandy
Member
*****
Posts: 5401


Mesa, AZ.
« Reply #2 on: July 24, 2012, 06:05:35 AM »
You have very few posts. Is your Valk new to you. It's possible the PO bypassed it. Open the switch housing and see if the wires are jumped.
Logged
http://i982.photobucket.com/albums/ae310/sandyal55/ManCave.jpg
shavdog
Member
*****
Posts: 55

Walker, Minnesota
« Reply #3 on: July 24, 2012, 06:57:46 AM »
you are correct...this valkyrie is new to me...not sure what you mean by  "jumped" but I will try the wd40...thanks.
Logged
Fritz The Cat
Member
*****
Posts: 1976


"The mountains are calling and I must go."
« Reply #4 on: July 24, 2012, 07:37:47 AM »
No way I'd spray WD40 in there. Radio Shack contact cleaner is better suited for the job.
Logged
Chrisj CMA
Member
*****
Posts: 14805


Crestview (Panhandle) Florida
« Reply #5 on: July 24, 2012, 08:06:56 AM »
Quote from: Fritz The Cat on July 24, 2012, 07:37:47 AM
No way I'd spray WD40 in there. Radio Shack contact cleaner is better suited for the job.

Probably better, but WD-40 fixed mine right after I got the bike and never had a problem for years after that........theres always something better, but WD-40 and duct tape fixes almost anything Cheesy
Logged
KY,Dave (AKA Misunderstood)
Member
*****
Posts: 4146


Specimen #30838 DS #0233

Williamsburg, KY
« Reply #6 on: July 24, 2012, 11:37:58 AM »
Quote from: sandy on July 24, 2012, 06:05:35 AM
You have very few posts. Is your Valk new to you. It's possible the PO bypassed it. Open the switch housing and see if the wires are jumped.

I 2nd this. Some people don't like the kill switch functioning and jump (or disengage it) and you may need to reconnect the wiring for it to work.
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS