Interstate Riser Fitment

[NITRO]

Does anyone know if these risers will fit the Interstate? I bought them quite a few years ago to use on my Standard, but didn't get around to putting them on. I now have an Interstate and am not sure that the large "heads" on the risers will work with the IS fairing. Any input would be appreciated.

Here is a pic of one of the risers:

[Jess from VA]

I don't have them, but they should work with no problem.  It will only take a few minutes to mount them and see.  And turn the handlebars to the lock each way to check your wires/hoses for tightness.  You may need to turn the wire clips on the back of the handlebars *180, like is often done with taller risers.

[NITRO]

Thanks. I figured someone here must have tried them, they're pretty common risers. I'll just have to throw them on in the spring, I need to take the fairing off anyway.

[Michvalk]

Actually, you don't need to remove the fairing to change risers. But you do need to pad the gas tank heavily, to keep from denting the tank when you drop the clamp off. Don't ask how I know

[stude31]

An extra set of hands sure does provide added insurance to not to the thinkable.