Valkyrie Riders Cruiser Club
July 31, 2025, 03:54:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Pages: [1]   Go Down
Send this topic Print
Author Topic: Leatherlyke bags on Valkyrie  (Read 1314 times)
pancho
Member
*****
Posts: 2113


Bonanza Arkansas


« on: May 05, 2013, 01:01:48 PM »

Hey guys, these bags were on my bike when I bought it. They mount perfectly, but dont seem to be for this bike?? THey only mount on the two fender rail bolts, and have no support so they can flap or be pulled out. ALso they rest/hit on the shocks so the shocks will get boogered up. I am wondering if I am missing some mounting hardware?? wrong bags for the bike?? or just a flimsy design?? I would appreciate input from anyone who knows these bags.   THanks







Logged

The most expensive things you will purchase, are those things you would not have needed if you had listened and obeyed.
Willow
Administrator
Member
*****
Posts: 16650


Excessive comfort breeds weakness. PttP

Olathe, KS


WWW
« Reply #1 on: May 05, 2013, 01:12:28 PM »

Those look like the correct bags.

They mount in only two spots.  They should be snug enough to not "flop".  They can be moved a little with some pressure.

If you keep them on there you may want to reinforce the mount points.  they can crack.

MarkT's Leatherlyke Reinforcement Mod 
Logged
BonS
Member
*****
Posts: 2198


Blue Springs, MO


WWW
« Reply #2 on: May 05, 2013, 01:13:02 PM »

That's the way they mount. Easy on, easy off. You're not the first to not like the way they rest against the shocks. I've never heard of any ill side effects despite dire warnings by some. On the other hand, I've heard of plenty of Progressive shocks leaking all by themselves.
Logged

Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #3 on: May 05, 2013, 01:31:15 PM »

+1 On the way they mount. I installed mine new and that's all there is as far as the two mounting studs. The shock skid has caused the edge of the shock tube to crack. I thought about making some kind of support but haven't had the time for that project. There is a recommended load weight limit on the underside of the lid. I believe it to be 20 lbs.
Logged
six2go #152
Member
*****
Posts: 976

Ft. Wayne, IN


« Reply #4 on: May 05, 2013, 01:40:41 PM »

Way back in the early days of Valkyriedom there was a guy in California who made a support bracket for the specific purpose of keeping the bags off the shocks. I had some, they worked as advertised, but I let them go with the bags when I sold them. Maybe someone else has some laying around.
Logged
Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #5 on: May 05, 2013, 01:57:13 PM »

Hey guys, these bags were on my bike when I bought it. They mount perfectly, but dont seem to be for this bike?? THey only mount on the two fender rail bolts, and have no support so they can flap or be pulled out. ALso they rest/hit on the shocks so the shocks will get boogered up. I am wondering if I am missing some mounting hardware?? wrong bags for the bike?? or just a flimsy design?? I would appreciate input from anyone who knows these bags.   THanks









I like the use of the overbed table from a hospital to place your tools on. I think I may have to bring one home when I see one in the maintenance shop targeted for the dumpster. A lot times they are thrown out when they are no longer able to be adjusted up and down.
Logged
pancho
Member
*****
Posts: 2113


Bonanza Arkansas


« Reply #6 on: May 05, 2013, 05:03:19 PM »

Appreciate the input guys, thanks for that link Willow, I will do that reinforcement even though I want Valkyrie bags, mounts and rails,,, no telling how long I will be riding with these.
Logged

The most expensive things you will purchase, are those things you would not have needed if you had listened and obeyed.
dan7uk
Member
*****
Posts: 109

Louisville, Kentucky


« Reply #7 on: May 05, 2013, 05:32:25 PM »

Don't over think it.  I have the same bags and what you have is correct, that's all the support they need.  Follow the 20# weight cap. that's on the sticker and you will be fine.
Logged
SANDMAN5
Member
*****
Posts: 2176


Mileage 65875

East TN


« Reply #8 on: May 06, 2013, 08:11:53 AM »

I've had mine for 6 years and 32,000 miles. No problems!!
Logged

"Evolution" is a dying religion being kept alive with tax dollars.


Fritz The Cat
Member
*****
Posts: 1976


"The mountains are calling and I must go."


« Reply #9 on: May 06, 2013, 07:13:09 PM »

Mine have brackets that keep them away from the shocks. I always thought they came with the bags but I guess not. The right side looks like the bracket is hitting the shock but it's not, it's a good inch or more away from it.



Logged

Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #10 on: May 08, 2013, 06:43:09 PM »

Mine have brackets that keep them away from the shocks. I always thought they came with the bags but I guess not. The right side looks like the bracket is hitting the shock but it's not, it's a good inch or more away from it.






I assume these are held tight in place by the thread bag stud and not just slid over the stud being held against the fender rail with the pressure of the bag? I like this possible solution to keep them from banging the shock tube.
Logged
MarkT
Member
*****
Posts: 5196


VRCC #437 "Form follows Function"

Colorado Front Range - elevation 2.005 km


WWW
« Reply #11 on: May 09, 2013, 12:54:31 AM »

Mine have brackets that keep them away from the shocks. I always thought they came with the bags but I guess not. The right side looks like the bracket is hitting the shock but it's not, it's a good inch or more away from it.






I assume these are held tight in place by the thread bag stud and not just slid over the stud being held against the fender rail with the pressure of the bag? I like this possible solution to keep them from banging the shock tube.


Those are the bag braces from the machine shop in CA that used to be available.  They stopped making them years ago.  They were well made, anodized aluminum.  I sold the pair I had years ago when I got rid of those POS LL bags.  You might still find a pair floating around, from someone else who also dumped the LL bags.  The braces are quite durable, should last indefinitely.  Though you can't say the same for the bags.
Logged


Vietnam-474 TFW Takhli 9-12/72 Linebckr II;307 SBW U-Tapao 05/73-4
Fritz The Cat
Member
*****
Posts: 1976


"The mountains are calling and I must go."


« Reply #12 on: May 09, 2013, 04:54:55 AM »

Yea, I'm not crazy about the bags. You can open them faster without the key than with. Bogus security as far as I'm concerned. I wouldn't buy them but since they were on the bike when I got it, guess I'll keep them.
Logged

Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #13 on: May 09, 2013, 05:40:06 AM »

The locks I feel are only there to keep the lid closed and in place and to keep the honest person out. Any bag can be broke into if they really want in. It was a budget thing when I bought mine. I keep nothing of value in my bags.
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: