Valkyrie Riders Cruiser Club
July 30, 2025, 12:43:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: Can You Identify This?  (Read 2362 times)
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« on: May 12, 2013, 08:28:15 PM »

I pulled in my garage and seen this underneath my new bike. It is some kind of bearing that measures about 5/16". I have no clue where it  came from.  Undecided

Any help will be appreciated.


Logged
Gryphon Rider
Member
*****
Posts: 5227


2000 Tourer

Calgary, Alberta


« Reply #1 on: May 12, 2013, 08:46:23 PM »

It's from one of the rollers that rides in the track of your garage door.  angel
Logged
judd
Member
*****
Posts: 265


VRCC# 13453

B.C. Canada


« Reply #2 on: May 12, 2013, 08:50:10 PM »

Muffler bearing !!!  Evil
Logged
old2soon
Member
*****
Posts: 23402

Willow Springs mo


« Reply #3 on: May 12, 2013, 09:02:50 PM »

It's from a reverse curve left threaded doomaflotchit.  2funny RIDE SAFE.
Logged

Today is the tommorow you worried about yesterday. If at first you don't succeed screw it-save it for nite check.  1964  1968 U S Navy. Two cruises off Nam.
VRCCDS0240  2012 GL1800 Gold Wing Motor Trike conversion
tank_post142
Member
*****
Posts: 2629


south florida


« Reply #4 on: May 12, 2013, 10:31:46 PM »

pachinko ball?
Logged

I got a rock Sad
VRCCDS0246 
Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #5 on: May 13, 2013, 03:12:32 AM »

Has a Harley been parked in your garage? Seriously, the garage door bearing suggestion might be it, however that is a big ball to come from the door rollers. It maybe worth a look at the bearings that hold the shaft for the cables and counter balance spring.
Logged
Jess from VA
Member
*****
Posts: 30519


No VA


« Reply #6 on: May 13, 2013, 03:30:19 AM »

I hate when that happens.

The usual suspect when I find parts in the drive and lawn is a lawnmower part (but I doubt the ball bearing is lawnmower related).

Could it be slingshot ammo? 
Logged
hairyteeth
Member
*****
Posts: 263


NW Ohio


« Reply #7 on: May 13, 2013, 04:48:53 AM »

Check if your pressure cooker is on the shelf...JK
Seriously looks too big for a garage door opener track wheel.
HT
Logged
hubcapsc
Member
*****
Posts: 16788


upstate

South Carolina


« Reply #8 on: May 13, 2013, 04:53:37 AM »


I'm not sure what that is, but Interstates have a lot of extra parts,
so don't worry about it  cooldude

-Mike
Logged

Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida


« Reply #9 on: May 13, 2013, 05:00:21 AM »

I wouldn't get any sleep if I worried about all the spare parts that just mysteriously appear on my shop floor.  Roll Eyes
Actually Jess beat me, I was wondering about a neighbor kid with a slingshot.
Logged
sandy
Member
*****
Posts: 5397


Mesa, AZ.


« Reply #10 on: May 13, 2013, 05:04:32 PM »

It's a high speed knifilin pin. You get those when you have sand in the wheelbase.
Logged

Jess from VA
Member
*****
Posts: 30519


No VA


« Reply #11 on: May 13, 2013, 05:26:26 PM »

Hey Big-T......... aren't you glad you asked?   Grin

Everybody's a comedian.

I posted up a part pic once, and one guy got it right... a rubber plug on Kury Hwy pegs.

Everybody else was a comedian though.
Logged
Bert AKA,Valkaholic
Member
*****
Posts: 1255


Back-N-Black


« Reply #12 on: May 13, 2013, 06:17:22 PM »

It's definitely a Ball Bearing and It is bigger than any I have seen on a Valkyrie. If you find any more ,then I would be suspicious about where they came from.
Logged

Life Is A Highway, I Wanna Ride It All Night Long !
valky1500
Member
*****
Posts: 206


MI


« Reply #13 on: May 13, 2013, 07:03:40 PM »

It's definitely a Ball Bearing and It is bigger than any I have seen on a Valkyrie. If you find any more ,then I would be suspicious about where they came from.

Oh I'm not so sure about that. It could be from anywhere.

Just tossing 1 of those things up at a time from a half a handful will teach the car(s) behind to not get too close next time.  Grin
Logged

'98 Standard
'01 IS
Yes I pull a trailer

I have taken notice to those who use that word (Precautionary) and abide by it are not only very happy in life...
but they also live long and prosper.  Wink
Bigun
Member
*****
Posts: 254


VRCC# 32964

Monroe, Iowa


« Reply #14 on: May 13, 2013, 07:13:09 PM »

Have any friends that are comedians? I dropped a bolt now and then under a friends Harley, might have taken it too far because he traded it in on a new one. LOL
Logged

1999 Valkyrie Interstate
Former BMW Guy
Member
*****
Posts: 523


Aut viam inveniam aut faciam.

Apple Valley, MN


« Reply #15 on: May 13, 2013, 07:16:34 PM »

The elusive Flux capacitor.

 2funny

JP
Logged

Motorcycling is not, of itself, inherently dangerous.
It is however, extremely unforgiving of: inattention, ignorance, incompetence or stupidity.
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« Reply #16 on: May 13, 2013, 09:03:51 PM »

Has a Harley been parked in your garage? Seriously, the garage door bearing suggestion might be it, however that is a big ball to come from the door rollers. It maybe worth a look at the bearings that hold the shaft for the cables and counter balance spring.

Where exactly are they located?
Logged
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« Reply #17 on: May 13, 2013, 09:22:48 PM »

Yep, Lot of comedians here and I needed a good laugh!  Grin I still have no clue and give up and if I ever figure it out I'll sure post it! It's been a long time since I replaced any bearings and besides, this one had no grease on it but a some wear marks. Since I just  bought it with  only 8k, not knowing any history, I'm suspicious of everything and when I seen the bearing I was freaking out! 2funny When I've had these " mysteries on trucks and cars that I couldn't figure out, I just say "well when it comes apart I'll know what it is"! So I guess I'll apply this to the 2 wheeler and hope for the best!  2funny

Logged
tank_post142
Member
*****
Posts: 2629


south florida


« Reply #18 on: May 13, 2013, 09:25:53 PM »

chances are it had nothing to do with the bike ever and just landed there to piss you off. or it might have been picked up in the body work then fell out.
Logged

I got a rock Sad
VRCCDS0246 
WamegoRob
Member
*****
Posts: 731


Wamego, KS


« Reply #19 on: May 13, 2013, 10:17:44 PM »

You run a car tire?  Maybe it got stuck in the tread on the road and fell off in your garage.
Logged
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« Reply #20 on: May 14, 2013, 07:30:50 AM »

Tank I think you're right and WamegoRob, that woulda been a good guess but no car tire! Grin
Logged
tank_post142
Member
*****
Posts: 2629


south florida


« Reply #21 on: May 14, 2013, 08:29:02 AM »

i carry a hand full in my vest pocket for people who drive too close behind me. but I don't remember being in your garage lately ?
Logged

I got a rock Sad
VRCCDS0246 
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« Reply #22 on: May 14, 2013, 08:47:00 AM »

i carry a hand full in my vest pocket for people who drive too close behind me. but I don't remember being in your garage lately ?

Hahaha! Good idea about tailgaters! I just hope I don't find enough to throw at anybody!  2funny
Logged
Dr Bobs Patient
Member
*****
Posts: 267


Okatie, SC


« Reply #23 on: May 14, 2013, 11:09:18 AM »

It's a terminator metal residual ball.  When ever one of those terminators comes back in time, some of the metallic substances are pulled out from their bodies as a liquid, then doesn't coagulate back into the main body correctly and forms into a ball.  You should be grateful that you weren't around when that SOB came in!
« Last Edit: May 14, 2013, 11:11:40 AM by Dr Bobs Patient » Logged

I keep doing that which I cannot do, in order that I may learn how to do it. - Pablo Picasso
Jess from VA
Member
*****
Posts: 30519


No VA


« Reply #24 on: May 14, 2013, 01:13:29 PM »

You know, on the off chance it was slingshot ammo, I would be thinking about when the door is/was open, and obvious fields of fire to shoot thru the doorway (like where it came from).  IF you live in suburbia.  And if there were any dings in the back of any cages.
Logged
BIG--T
Member
*****
Posts: 3002


1998 Standard, 2000 Interstate

The Twilight Zone


« Reply #25 on: May 15, 2013, 06:34:50 AM »

You know, on the off chance it was slingshot ammo, I would be thinking about when the door is/was open, and obvious fields of fire to shoot thru the doorway (like where it came from).  IF you live in suburbia.  And if there were any dings in the back of any cages.

No chance, I live in da sticks!  2funny
Logged
salty1
Member
*****
Posts: 2359


"Flyka"

Spokane, WA or Tucson, AZ


« Reply #26 on: May 15, 2013, 08:48:32 AM »

I pulled in my garage and seen this underneath my new bike. It is some kind of bearing that measures about 5/16". I have no clue where it  came from.  Undecided

Any help will be appreciated.





I had a similar thing happen to me except I found a nut under my bike. I fussed and didn't find out for a few days that it was from my garage door
Logged

My rides:
1998 GL1500C, 2000 GL 1500CF,2006 GL 1800 3A

Grandpot
Member
*****
Posts: 630


Rolling Thunder South Carolina Chapter 1

Fort Mill, South Carolina


« Reply #27 on: May 15, 2013, 12:54:41 PM »

For you NAVY guys, it could be one of the ship's Relative Bearings we kept hearing about. uglystupid2
Logged

crazy2 Experience is recognizing the same mistake every time you make it.crazy2
Oklahoma_Valk
Member
*****
Posts: 375


Central OK


« Reply #28 on: May 15, 2013, 07:50:01 PM »

Looks to me like your bike might have lost one of its marbles.
Logged

Let those who ride decide.
Brian
Member
*****
Posts: 996


Monroe, NC


« Reply #29 on: May 16, 2013, 03:21:38 AM »

Has a Harley been parked in your garage? Seriously, the garage door bearing suggestion might be it, however that is a big ball to come from the door rollers. It maybe worth a look at the bearings that hold the shaft for the cables and counter balance spring.

Where exactly are they located?

Above my garage door is long shaft mounted on the header. At each end of this shaft is a mounting plate with bearings and a hub that wraps the door assist cables on. In the center is another support with a bearing mounted that the torsion spring attaches to, the other end of the long spring attaches to the shaft with set screws. If I remember correctly the center bearings were visible but not as big as the one you found. The new spring has the ball bearings sealed. I wasn't trying to be a comedian. Better tailgator deterrent is .595 solid lead balls. cooldude
Logged
SpidyJ
Member
*****
Posts: 794

Murrells Inlet


« Reply #30 on: May 16, 2013, 08:58:10 AM »

It is  an Orb of unidentified origin.

 Undecided

Logged

1999 Fast Black Interstate

Peace,
johnnywebb
tank_post142
Member
*****
Posts: 2629


south florida


« Reply #31 on: May 16, 2013, 11:04:30 AM »

sputnik's little brother?
Logged

I got a rock Sad
VRCCDS0246 
Jess from VA
Member
*****
Posts: 30519


No VA


« Reply #32 on: May 16, 2013, 01:15:47 PM »

FWIW, I have a little spot in my bike shed where I put nuts, bolts, springs, and other small parts I just happen to find laying around (wondering what the heck that fell off?).  I has grown in size over the years, and every once in a while I find something missing on a machine (like the lawnmower), and guess where I check first. 
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: