Valkyrie Riders Cruiser Club
September 12, 2025, 10:27:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > So,I got my new inner cable for my speedometer...need to lube with anything?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: So,I got my new inner cable for my speedometer...need to lube with anything?  (Read 859 times)
RDKLL
Member
*****
Posts: 1222


VRCC #1231 VRCCDS #271

Mesa, AZ
« on: July 01, 2013, 07:58:07 PM »
Thoght I would ask. Thanks in advance
Logged
saddlesore
Member
*****
Posts: 1579
« Reply #1 on: July 01, 2013, 08:37:12 PM »
I think graphite powder is recomended but I use a light oil.
Logged
DARE TO BE DIFFERENT
sandy
Member
*****
Posts: 5409


Mesa, AZ.
« Reply #2 on: July 01, 2013, 09:30:42 PM »
I've used a white lithium grease and Bel Ray waterproof.
Logged
http://i982.photobucket.com/albums/ae310/sandyal55/ManCave.jpg
RP#62
Member
*****
Posts: 4088


Gilbert, AZ


WWW
« Reply #3 on: July 02, 2013, 05:01:17 AM »
Probably any kind of grease would be fine.  Some light aircraft I used to work on used the same type of cable to drive the Tach.  The Piper book said to use moly grease on it.

-RP
Logged
 
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #4 on: July 02, 2013, 06:32:15 AM »
Yep, I like to work/rub in a light grease. Used to always use white lithium, but I just don't have it laying around anymore.
Logged
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #5 on: July 02, 2013, 11:41:35 AM »
Also, just thought I'd mention, be careful when re-installing the drive end. That little plastic thing is pretty fragile.
Logged
RDKLL
Member
*****
Posts: 1222


VRCC #1231 VRCCDS #271

Mesa, AZ
« Reply #6 on: July 03, 2013, 06:01:50 AM »
I now have speedometer and odometer readings again! YeaY!

The replacement cable seemed to be all metal including the part that interacts with the blade at the front wheel.
Logged
wild6
Member
*****
Posts: 251


(Old enough to know better)

Vernon, NJ
« Reply #7 on: July 03, 2013, 11:08:33 AM »
Quote from: RDKLL on July 03, 2013, 06:01:50 AM
The replacement cable seemed to be all metal including the part that interacts with the blade at the front wheel.

I think what he meant was that the recessed retaining screw at the wheel-end goes through a plastic flange and can crack it open if tightened too much.
Logged

“Meddle not in the affairs of the Dragon, for you are crunchy and taste good with ketchup.”
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #8 on: July 03, 2013, 12:36:12 PM »
Quote from: wild6 on July 03, 2013, 11:08:33 AM
Quote from: RDKLL on July 03, 2013, 06:01:50 AM
The replacement cable seemed to be all metal including the part that interacts with the blade at the front wheel.

I think what he meant was that the recessed retaining screw at the wheel-end goes through a plastic flange and can crack it open if tightened too much.


Yep !
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS