carb synch tool

[franco6]

Hello, been doing the timing belt fuel/vacuum hoses on the ST and woul realy like to make sure the carbs are synched this time ,is Dag s outfit somewhere close by ?
Thanks . Fred.

[HurstRob]

I am about to do the very same thing,,keep us posted of any difficulties and / or shortcuts.

[franco6]

The valk is fairly straight forward installing the timing belts. on the St there is only one so it s a little tricky to have all timing marks staying aligned .I had to change the iddler pulley as the one on the bike was rumbling a little .Also, the easiest way I found was to start on top left than iddler pulley than right than driving pulley than over the tensioner. The manual has a different way of doing it.As for the synchroniser I guess no one knows where it s at ,so I bought my own!

[Tx Bohemian]

The valk is fairly straight forward installing the timing belts. on the St there is only one ...

Maybe it's too early in the morning for me but what does this mean?
I take it your saying there's only one timing belt on a Standard?

[Lyn-Del]

The carb sync tool was in the "VRCC" cabinet last time I looked.

[franco6]

two belts on valkyries ,one belt on ST1100