Bullet connectors

[Jeff K]

I searched and found posts that said the connectors are 4mm, 3.9mm and 3.5mm
It can't be all three. I measured one and it seems like 3.5 but they aren't nice and round.

[YoungPUP]

Here ya go brother. I asked the same question when I put in my Hoppe converter for the rear stop tail turn. 

http://www.valkyrieforum.com/bbs/index.php/topic,37062.0.html

[Jeff K]

Yeah, i saw that one, and this one where someone said 3mm and you said 2.5mm. 

http://www.valkyrieforum.com/bbs/index.php/topic,63623.msg616687/topicseen.html#msg616687

[BF]

This is what I used when I did my bike. 

http://www.vintageconnections.com/

[BonS]

I put a caliper on one and it's 3.5mm.

[John Schmidt]

Yes, 3.5 and Vintage Connections has been my source for the last 10-12 years. Private company, owned and operated by a guy that saw a need and filled it when he went looking for what he now sells. I keep a large supply of the male bullets as well as a good assortment of 1, 2, & 3 female connectors. I also keep a supply of the various sizes of multi pin connectors, from the 9 pin down to the 2 pin. He ships fast and quite reasonable. 

[BF]

I've never put a digital caliper on one, but the 4mm connectors from Vintage are the same size as on my bike and fit perfectly.   

[big poppa pump]

Thanks for posting the link. Ordered some 4mm connectors and a few assorted pins.