Noob question about throttle assembly

[big poppa pump]

Trying to adjust the throttle slack and I have somewhat of a noob question. Looking at the carb bank from the right side of the bike, is the pull cable supposed to be attached to the carb bank to the back or the front or does it make no difference at all which cable goes where? 

Thanks.

[Gavin_Sons]

There are 2 cables. One is when you release the throttle it springs back and the other is the throttle cable. I believe the one that springs back is the rear one (the one more toward the center of the bike). Hope this makes sense.

[big poppa pump]

There are 2 cables. One is when you release the throttle it springs back (PUSH) and the other is the throttle cable (PULL). I believe the one that springs back is the rear one (the one more toward the center of the bike). Hope this makes sense.

PUSH = rear
PULL = front

[Gavin_Sons]

Believe you got it 

[Attic Rat]

you can adjust the inside cable to take up the slack. The outside cable is not adjustable

[big poppa pump]

Finally got it done last night. Thanks everyone for your help.