Valkyrie Riders Cruiser Club
July 12, 2025, 05:33:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > 2000 Valkyrie Interstate > 97,000 KM > timing belt replacement > Honda Part #'s
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: 2000 Valkyrie Interstate > 97,000 KM > timing belt replacement > Honda Part #'s  (Read 1365 times)
northernunity
Member
*****
Posts: 34


2000 Valkyrie Interstate > Peterborough Ontario
« on: July 14, 2015, 07:27:05 AM »
About to change my timing belts & adjusters and after reading here ... seems like I can save a lot of $$$ by buying belts from automotive supply.

My question > when I look up Honda replacement parts > they show a L & R belt with different part numbers > L > 11550-MZ0-000  &  R > 11540-MZ0-000.  Usually on Honda parts explosion diagrams ... if multiple parts are the same they will all refer to same part number.  Is there any reason that they refer to L & R ( other than to get more $$$ ) ... if not then I would buy the Gates or Napa ones.

Appreciate any practical input.

Thanx ... Jim
Logged
John Schmidt
Member
*****
Posts: 15224


a/k/a Stuffy. '99 I/S Valk Roadsmith Trike

De Pere, WI (Green Bay)
« Reply #1 on: July 14, 2015, 07:37:02 AM »
The belts are the same, either side.
Logged
rhinor61
Member
*****
Posts: 188


Northern California
« Reply #2 on: July 14, 2015, 07:41:14 AM »

The Gates T275 is the timing belt you want x2.
they are the OEM supplied belt supplied to Honda from GATES.

AMAZON $15.57 each
http://www.amazon.com/Gates-T275-Timing-Belt/dp/B000CRDMS8


John
Logged
John

Northern California
1998 Valkyrie Tourer Black/jade
VRCC #28001
northernunity
Member
*****
Posts: 34


2000 Valkyrie Interstate > Peterborough Ontario
« Reply #3 on: July 14, 2015, 08:04:46 AM »
Thanx John .... I was just curious if there truly is any difference between the two sides.  Honda shows both adjusters as same part number ... just seemed odd that they wouldn't just show (2) beside the single part number.
Logged
allanbegg
Member
*****
Posts: 91


Marietta, PA
« Reply #4 on: July 14, 2015, 11:07:32 AM »
I just installed two Gates T275 belts a couple of weeks ago.
There is no difference between the left and right belts.
Allan
Logged
VRCC # 36795
northernunity
Member
*****
Posts: 34


2000 Valkyrie Interstate > Peterborough Ontario
« Reply #5 on: July 14, 2015, 01:20:49 PM »
Guess I am getting old .... well yeah I am ( 64 ) ! 

My mistake in reading parts explosions > I was reading the part numbers for left & right timing "covers". 

When I went back to look at all the models of Valkyries and all the years > parts explosions .... I found my mistake > they all have the same timing belt part > 14401-MN5-004 @ $55.94

So thanx for the help fellow riders ... now I feel bit better about getting the belts & adjusters ...  at my age I am used to making mistakes >>>> " yes dear"  usually resolves it !
Logged
northernunity
Member
*****
Posts: 34


2000 Valkyrie Interstate > Peterborough Ontario
« Reply #6 on: July 28, 2015, 11:27:20 AM »
Well I just got the two replacement Gates belts from RockAuto in U.S. to my Canadian address in Ontario for a total of $45.49 Cdn.  They even had the Honda part number sticker on them.  Priced them out at local Honda dealer > exact same belt $78.00 each > tax in for two > $176.28 ... for a whopping savings of $130.69 !!

Wouldn't have known about this without the input from people on this forum ... THANX
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS