Valkyrie Riders Cruiser Club
July 10, 2025, 12:55:02 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Fuse--what capacity?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Fuse--what capacity?  (Read 596 times)
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« on: November 03, 2015, 10:05:01 AM »
Adding the Dan-mark shut off.  What size fuse should I use?
Logged
Nothing in moderation...
MarkT
Member
*****
Posts: 5196


VRCC #437 "Form follows Function"

Colorado Front Range - elevation 2.005 km


WWW
« Reply #1 on: November 03, 2015, 09:02:48 PM »
It doesn't draw much power.  5a is good.
Logged

Vietnam-474 TFW Takhli 9-12/72 Linebckr II;307 SBW U-Tapao 05/73-4
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #2 on: November 04, 2015, 03:19:18 AM »
There are acc. wires under the right side cover which I think come from the 5 amp fuse in the panel.
Logged
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« Reply #3 on: November 04, 2015, 07:38:28 AM »
Thanks Mark and Patrick.  I am using the accessory circuit to power a relay that in turn powers a fuse panel which I use for my driving lights, horn and amp.  I did not think the dan-marc would take a large fuse, but always appreciate the help on the board.

greg
Logged
Nothing in moderation...
salty1
Member
*****
Posts: 2359


"Flyka"

Spokane, WA or Tucson, AZ
« Reply #4 on: November 04, 2015, 08:22:59 AM »
Quote from: Fazer on November 04, 2015, 07:38:28 AM
Thanks Mark and Patrick.  I am using the accessory circuit to power a relay that in turn powers a fuse panel which I use for my driving lights, horn and amp.  I did not think the dan-marc would take a large fuse, but always appreciate the help on the board.

greg
I do the same on powering an auxiliary fuse block with the accessory wire. As Mark suggested , I'm using a 5amp fuse on the Dan Marc circuit.
Logged
My rides:
1998 GL1500C, 2000 GL 1500CF,2006 GL 1800 3A
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS