Valkyrie Riders Cruiser Club
November 27, 2025, 06:11:24 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Front turn signals install on an IS, got to be a easier way?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Front turn signals install on an IS, got to be a easier way?  (Read 795 times)
bt24
Member
*****
Posts: 52


Rio Rancho, NM
« on: May 24, 2016, 07:43:55 PM »
Good evening,
I tried to search for a thread on front turn signal install on a IS with no luck, if there is already at thread I apologize.

My question is, is there an easier way to get to the bolts to undo the Front turn signals install on an IS fairing? Impossible to reach, got to be a easier way?

Thank you in advance!
Bryan
Logged
Hook#3287
Member
*****
Posts: 6678


Brimfield, Ma
« Reply #1 on: May 24, 2016, 08:40:40 PM »
I'm new to the Interstate world, but it appears you have to remove the fairing to get to them.  That's what I did, but I was removing it anyways, to fix just about everything.
Logged
bt24
Member
*****
Posts: 52


Rio Rancho, NM
« Reply #2 on: May 24, 2016, 08:44:47 PM »
Quote from: Hook#3287 on May 24, 2016, 08:40:40 PM
I'm new to the Interstate world, but it appears you have to remove the fairing to get to them.  That's what I did, but I was removing it anyways, to fix just about everything.

Yep I was hoping I wouldn't have to do that, thank you for the feedback!
Logged
Bighead
Member
*****
Posts: 8654


Madison Alabama
« Reply #3 on: May 25, 2016, 05:39:19 AM »
Not very hard to remove. Just tame your time
Logged
1997 Bumble Bee
1999 Interstate (sold)
2016 Wing
gordonv
Member
*****
Posts: 5766


VRCC # 31419

Richmond BC
« Reply #4 on: May 25, 2016, 05:01:19 PM »
I believe it is as easy as removing the inner fairing, so you can get to the 2 bolts/2 nuts holding the fairing to the Triple Tree (TT). Unplug the wire and lift it away. Easier with 2 people but I did it with one. I had to remove the windshield also, so I had gone further.
Logged
1999 Black with custom paint IS
bt24
Member
*****
Posts: 52


Rio Rancho, NM
« Reply #5 on: May 27, 2016, 06:17:46 PM »
Quote from: gordonv on May 25, 2016, 05:01:19 PM
I believe it is as easy as removing the inner fairing, so you can get to the 2 bolts/2 nuts holding the fairing to the Triple Tree (TT). Unplug the wire and lift it away. Easier with 2 people but I did it with one. I had to remove the windshield also, so I had gone further.

Well thanks for the advise, I did take the fairing and the windshield off and cleaned it all up then removed the old and installed the new one's.

Thanks again,
Bryan
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS