Valkyrie Riders Cruiser Club
July 06, 2025, 03:15:39 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > brake retainer where does it go??
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: brake retainer where does it go??  (Read 739 times)
slider
Member
*****
Posts: 449


mulberry arkansas
« on: May 31, 2016, 11:26:42 AM »
Doing pumpkin service  while putting back together found a piece which I finally located in book...brake pad retainer  the problem is it doesn't show where it goes on the rear caliper just says make sure pads rest on the pad retainer,,,,could someone  tell me where this cotton picker goes  help again please..
Logged
a proud navy veteran
hubcapsc
Member
*****
Posts: 16781


upstate

South Carolina
« Reply #1 on: May 31, 2016, 11:44:27 AM »

You can see it here:



Your front calipers have them, they could be  your guide...

-Mike
Logged
https://sites.google.com/a/g.clemson.edu/confederate-memorial-day-at-clemson/
WintrSol
Member
*****
Posts: 1344


Florissant, MO
« Reply #2 on: May 31, 2016, 12:49:01 PM »
The retainer pictured in the service manual fits into the front of the caliper, and the slots on that end of the pads fit onto it; the pin being turned by Mike is at the rear, and fits through the holes in the pads on that end.
Logged
98 Honda Valkyrie GL1500CT Tourer
Photo of my FIL Jack, in honor of his WWII service
hubcapsc
Member
*****
Posts: 16781


upstate

South Carolina
« Reply #3 on: May 31, 2016, 01:03:39 PM »

Yeah, I guess that's the "SPRING, PAD" (43108-MT3-006) you
can see peeking out in my picture, not the "RETAINER"
(43112-MT3-006), I forgot there were two funny looking little
frobs in there...

-Mike
Logged
https://sites.google.com/a/g.clemson.edu/confederate-memorial-day-at-clemson/
WintrSol
Member
*****
Posts: 1344


Florissant, MO
« Reply #4 on: May 31, 2016, 03:35:54 PM »
I've never taken mine off, but pretty sure it clips onto the bracket, as indicated in the parts breakdown: http://www.partzilla.com/parts/search/Honda/Motorcycle/1998/GL1500CT+A/REAR+BRAKE+CALIPER/parts.html
Logged
98 Honda Valkyrie GL1500CT Tourer
Photo of my FIL Jack, in honor of his WWII service
slider
Member
*****
Posts: 449


mulberry arkansas
« Reply #5 on: May 31, 2016, 07:47:57 PM »
thanks guys your info   really helped,I had the spring figured out and with your help the retainer fit right in
Logged
a proud navy veteran
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS