Valkyrie Riders Cruiser Club
July 06, 2025, 05:15:48 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: 98 front wheel bearings on a 97  (Read 692 times)
slythern12
Member
*****
Posts: 44


Fayetteville Ar.


« on: July 02, 2016, 02:55:07 PM »

I have a 97 standard and I think my front wheel bearings are going. I have talked to a friend that is VERY good with Valkyries and he says buy bearing for a 98 or above because they are better, I just want to be sure they will work ok. I just want to check and see what you guys think too. Sorry if i'm bringing up an old subject but I searched the forum and couldn't find an answer. Thanks in advance.
« Last Edit: July 02, 2016, 03:02:35 PM by slythern12 » Logged
Bighead
Member
*****
Posts: 8654


Madison Alabama


« Reply #1 on: July 02, 2016, 03:17:10 PM »

The only difference in the 97 - 98 is the rotors that I know of. So they should work.
Logged

1997 Bumble Bee
1999 Interstate (sold)
2016 Wing
Valkpilot
Member
*****
Posts: 2151


What does the data say?

Corinth, Texas


« Reply #2 on: July 02, 2016, 03:30:53 PM »

I have a 97 standard and I think my front wheel bearings are going. I have talked to a friend that is VERY good with Valkyries and he says buy bearing for a 98 or above because they are better, I just want to be sure they will work ok. I just want to check and see what you guys think too. Sorry if i'm bringing up an old subject but I searched the forum and couldn't find an answer. Thanks in advance.

It's not that simple.  The front '97 bearings have an outer race diameter that is smaller than the '98.  So, the bearing cup in the wheel is smaller as well.  The '98 bearings won't fit in a '97 wheel.

That said, I've got both and front bearing wear just isn't much of an issue.
Logged

VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   
Chrisj CMA
Member
*****
Posts: 14775


Crestview (Panhandle) Florida


« Reply #3 on: July 02, 2016, 03:58:24 PM »

The only difference in the 97 - 98 is the rotors that I know of. So they should work.

Hate to rain on your parade, but all front rotors are the same for all Valkyries.

BUT

'97 front wheel bearings are smaller outer diameter that all subsequent years, so No '98 bearings will not work
Logged
Bighead
Member
*****
Posts: 8654


Madison Alabama


« Reply #4 on: July 02, 2016, 04:57:39 PM »

The only difference in the 97 - 98 is the rotors that I know of. So they should work.

Hate to rain on your parade, but all front rotors are the same for all Valkyries.

BUT

'97 front wheel bearings are smaller outer diameter that all subsequent years, so No '98 bearings will not work
Ain't rainin on me . There you go 2funny thought I had heard they were different. Maybe the rotors wouldn't fit another year rim? Dunno but sounds like the rim is different in itself.
Logged

1997 Bumble Bee
1999 Interstate (sold)
2016 Wing
Chrisj CMA
Member
*****
Posts: 14775


Crestview (Panhandle) Florida


« Reply #5 on: July 02, 2016, 05:12:48 PM »

The only difference in the 97 - 98 is the rotors that I know of. So they should work.

Hate to rain on your parade, but all front rotors are the same for all Valkyries.

BUT

'97 front wheel bearings are smaller outer diameter that all subsequent years, so No '98 bearings will not work
Ain't rainin on me . There you go 2funny thought I had heard they were different. Maybe the rotors wouldn't fit another year rim? Dunno but sounds like the rim is different in itself.

All front Valkyrie rotors fit all year Valkyries
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: