Valkyrie Riders Cruiser Club
July 10, 2025, 09:20:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: Rear drive assemble question  (Read 1956 times)
namsgt1946
Member
*****
Posts: 44


« on: September 25, 2009, 06:13:18 PM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!
Logged
R J
Member
*****
Posts: 13380


DS-0009 ...... # 173

Des Moines, IA


« Reply #1 on: September 25, 2009, 06:17:48 PM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!

Similar, but no cigar,
Logged

44 Harley ServiCar
 



 

98valk
Member
*****
Posts: 13487


South Jersey


« Reply #2 on: September 25, 2009, 06:26:51 PM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!


http://www.rattlebars.com/valkfaq/schematics/index.html
Logged

1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798
R J
Member
*****
Posts: 13380


DS-0009 ...... # 173

Des Moines, IA


« Reply #3 on: September 25, 2009, 06:42:57 PM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!


http://www.rattlebars.com/valkfaq/schematics/index.html


CA ya got a different link?   This link is for electrics.
Logged

44 Harley ServiCar
 



 

six2go #152
Member
*****
Posts: 975

Ft. Wayne, IN


« Reply #4 on: September 26, 2009, 05:17:03 AM »

CA ya got a different link?   This link is for electrics.   That's exactly what the OP was asking for RJ.
Logged
98valk
Member
*****
Posts: 13487


South Jersey


« Reply #5 on: September 26, 2009, 05:14:05 PM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!


http://www.rattlebars.com/valkfaq/schematics/index.html


CA ya got a different link?   This link is for electrics.


RJ,
there's links there for schematics and wiring diagrams at the top also.
Logged

1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798
mikeb
Member
*****
Posts: 311


vrcc-29271

dansville mi by lansing mi


« Reply #6 on: September 27, 2009, 07:02:28 AM »

By rear drive assembly I am refering to the aluminum housing with guts that attaches to swing arm and drives the rear wheel.  Now the question:  Will this housing on a "99 Valk swap with one from a "94 GL1500 Goldwing?  I know the swing arms are different but wondered if the drive was the same?  Anybody had to replace yours?
Also is there somewhere I can get a good electrical schematic on the '99 Valk?
Thanks for the help!!


http://www.rattlebars.com/valkfaq/schematics/index.html


CA ya got a different link?   This link is for electrics.


RJ,
there's links there for schematics and wiring diagrams at the top also.
heres one for the hard drive too good luck

http://www.valkyrienorway.com/1520manual/valkyriegl1500.zip








Logged

i dont care what you ride just ride
mike & kari
mivrcc capital city leader
s.s.d.d.
Pages: [1]   Go Up
Send this topic Print
Jump to: