Valkyrie Riders Cruiser Club
June 22, 2025, 11:54:26 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Pages: [1]   Go Down
Send this topic Print
Author Topic: Sheetmetal screws in the exhaust?  (Read 1101 times)
Serk
Member
*****
Posts: 21801


Rowlett, TX


« on: September 03, 2020, 04:14:03 PM »

Is there a reason someone would drive sheetmetal screws partially into a modified OEM exhaust? Crawling around under my new to me 1999 Interstate, and just behind the headers on both sides there are what appear to be sheet metal screws driven partially into the canister....

Any idea what that would have been done for???



Logged

Never ask a geek 'Why?',just nod your head and slowly back away...



IBA# 22107 
VRCC# 7976
VRCCDS# 226

1998 Valkyrie Standard
2008 Gold Wing

Taxation is theft.

μολὼν λαβέ
98valk
Member
*****
Posts: 13452


South Jersey


« Reply #1 on: September 03, 2020, 04:22:07 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.
Logged

1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798
Serk
Member
*****
Posts: 21801


Rowlett, TX


« Reply #2 on: September 03, 2020, 04:31:52 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?
Logged

Never ask a geek 'Why?',just nod your head and slowly back away...



IBA# 22107 
VRCC# 7976
VRCCDS# 226

1998 Valkyrie Standard
2008 Gold Wing

Taxation is theft.

μολὼν λαβέ
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #3 on: September 03, 2020, 04:37:17 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?

Leave them out
Logged
Serk
Member
*****
Posts: 21801


Rowlett, TX


« Reply #4 on: September 03, 2020, 06:21:16 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?

Leave them out

Done. And glad I did, they were only 2 or so turns in, that was just ASKING to fall out and end up in my rear tire on a Sunday hundreds of miles from nowhere!

Thanks!
Logged

Never ask a geek 'Why?',just nod your head and slowly back away...



IBA# 22107 
VRCC# 7976
VRCCDS# 226

1998 Valkyrie Standard
2008 Gold Wing

Taxation is theft.

μολὼν λαβέ
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #5 on: September 03, 2020, 06:40:24 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?

Leave them out

Done. And glad I did, they were only 2 or so turns in, that was just ASKING to fall out and end up in my rear tire on a Sunday hundreds of miles from nowhere!

Thanks!

It is amazing what some owners will do. He probably saw some condensation drip out, and figured "I better plug that up". I remember Hook talking about a bike he bought that had the side panels put on with drywall screws. (At least that's how I remember the story) It sounds like you are going over everything pretty good already. But wouldn't be a bad idea to replace antifreeze, check any wiring mods, etc.
Logged
Hook#3287
Member
*****
Posts: 6429


Brimfield, Ma


« Reply #6 on: September 03, 2020, 06:55:44 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?

Leave them out

Done. And glad I did, they were only 2 or so turns in, that was just ASKING to fall out and end up in my rear tire on a Sunday hundreds of miles from nowhere!

Thanks!

It is amazing what some owners will do. He probably saw some condensation drip out, and figured "I better plug that up". I remember Hook talking about a bike he bought that had the side panels put on with drywall screws. (At least that's how I remember the story) It sounds like you are going over everything pretty good already. But wouldn't be a bad idea to replace antifreeze, check any wiring mods, etc.
Yeah, and the PO used wood screws and epoxy to hold the I/S headlight assembly together.  Not even good wood screws.  He used flat heads.

He couldn't figure out the spring clips.

I gotta admit, I thought I knew more than Honda Engineers when I removed the "T" from the tank vent/drain hose.  Learned what that was about at the first rain storm I hit.
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #7 on: September 03, 2020, 07:02:14 PM »

take them out. that is the condensate drain so the internals do not rot out.  previous owner just didn't know any better.

Take 'em out periodically to let it drain, or take 'em out and leave 'em out?

Leave them out

Done. And glad I did, they were only 2 or so turns in, that was just ASKING to fall out and end up in my rear tire on a Sunday hundreds of miles from nowhere!

Thanks!

It is amazing what some owners will do. He probably saw some condensation drip out, and figured "I better plug that up". I remember Hook talking about a bike he bought that had the side panels put on with drywall screws. (At least that's how I remember the story) It sounds like you are going over everything pretty good already. But wouldn't be a bad idea to replace antifreeze, check any wiring mods, etc.
Yeah, and the PO used wood screws and epoxy to hold the I/S headlight assembly together.  Not even good wood screws.  He used flat heads.

He couldn't figure out the spring clips.

I gotta admit, I thought I knew more than Honda Engineers when I removed the "T" from the tank vent/drain hose.  Learned what that was about at the first rain storm I hit.
Grin (you wouldn't be the first)
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: