Valkyrie Riders Cruiser Club
February 04, 2026, 03:32:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > how the heck do you get at the bank angle sensor plug
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: how the heck do you get at the bank angle sensor plug  (Read 3119 times)
F6BANGER
Member
*****
Posts: 835


Albuquerque NM
« on: February 01, 2012, 08:16:17 AM »
what a PITA. Angry
« Last Edit: February 01, 2012, 08:24:49 AM by F6BANGER » Logged
Ricky-D
Member
*****
Posts: 5031


South Carolina midlands
« Reply #1 on: February 01, 2012, 08:26:20 AM »
Have you not got the shop manual?

Dag has one for download

And the best part is that it's free!

***
Logged
2000_Valkyrie_Interstate
F6BANGER
Member
*****
Posts: 835


Albuquerque NM
« Reply #2 on: February 01, 2012, 08:30:42 AM »
I have a manual. I have read how to do it. I just cant get to it. Im gonna try to unscrew the sensor from the center cover. That looks easier.
Logged
F6BANGER
Member
*****
Posts: 835


Albuquerque NM
« Reply #3 on: February 01, 2012, 08:40:08 AM »
well, maybe not. Any body got some little hands I can borrow? Is it easier pulling out the battery box?
Logged
Joe Hummer
Member
*****
Posts: 1645


VRCC #25677 VRCC Missouri State Representative

Arnold, MO


WWW
« Reply #4 on: February 01, 2012, 08:56:07 AM »
The couple of times I have had my center cover off, I have unscrewed the bank sensor from the cover.  It wasn't easy, but I was able to get it with a short screwdriver.  I would remove the closest screw first and flip the sensor over, which allowed me to move the cover in order to gain access to the other screw.  (And no, I do not have little hands.)

Joe
Logged
1999 Valkyrie Interstate
You pay for the whole bike, why not use it Jerry Motorman Palladino
F6BANGER
Member
*****
Posts: 835


Albuquerque NM
« Reply #5 on: February 01, 2012, 09:47:41 AM »
finally got it. Now to get the #*@&#& center cover off.....LOL

how do carefully release cover from tab? Do you pull up?
Logged
F6BANGER
Member
*****
Posts: 835


Albuquerque NM
« Reply #6 on: February 01, 2012, 10:28:56 AM »
Wow, I finally got it. Chrome is nice but a PITA when you have to pull it all off.

Just to remove the center cover, I had to lift the tank,pull  chrome engine hangers, chrome tranny covers(both sided to get to the spacers form the left side hanger.) Angry  I have pulled car engines faster than this.
Logged
lucky_1_chris
Member
*****
Posts: 428


Arlington, TX
« Reply #7 on: February 01, 2012, 12:04:18 PM »
Quote from: F6BANGER on February 01, 2012, 10:28:56 AM
Wow, I finally got it. Chrome is nice but a PITA when you have to pull it all off.

Just to remove the center cover, I had to lift the tank,pull  chrome engine hangers, chrome tranny covers(both sided to get to the spacers form the left side hanger.) Angry  I have pulled car engines faster than this.

I had a straight shot at the boot from under the bike (I/S). I couldnt get my hands between the battery box and the frame, and I was scare to tug on it hard enough to pull it up and through. Seemed impossible to get the cover off or back in without it rubbing one of the starter bolts so I taped it up before I removed it. Fun stuff...
Logged
1999 Valkyrie Interstate

2016 Victory Cross Country Tour
hubcapsc
Member
*****
Posts: 16816


upstate

South Carolina
« Reply #8 on: February 01, 2012, 04:05:09 PM »

I hate the center cover.

Don't put the sensor back on upside down, or you'll get to take
the center cover off twice  tickedoff  cooldude

-Mike
 
Logged
https://sites.google.com/a/g.clemson.edu/confederate-memorial-day-at-clemson/
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS