replacing the indicator lights in light bucket.

[ryord]

I would like to put LED's in the 3 indicator lights in the light bucket. neutral light  high beam and signal, I have tried gently to pull them off but I need more instruction on just where to pull and how hard. Thanks

[tank_post142]

run a butter knife under the edge and give it a twist. they come out pretty easy.

[BF]

Before you go any further, you might want to read this thread on installing leds in the indicator lights. 

"Using A Rebel Indicator Harness to allow LED turn indicator on STD/TOURER"

http://www.valkyrieforum.com/bbs/index.php/topic,35394.0.html

[Kep]

Do the mod.Its easy , cheap and well worth it. Its one of the best mods. I have done to my Valk ! One tip though..keep the stock high beam lamp in but switch the Neutral and Turn signal indicators to high power LEDs. The HP LED is too bright for the High beam indicator if you have a windshield , it creates too much glare on your windshield when driving at night .Biggest benefit and safety factor is the extemely bright turn signal indicator with the HP LED !You definitely know that your signal is on !!!!!

[D-Valk]

So where do I find the LED bulbs to replace the original Valk indicator bulbs?

[D-Valk]

https://www.superbrightleds.com/moreinfo/instrument-cluster-gauge/24-led-bulb-1-smd-led-miniature-wedge-retrofit-car/229/1077/