Tool to Adjust Rear Shock Preload Settings

[Fiat Lux]

My new to me 2001 Valkyrie Standard (black with silver stripe) is missing its tool kit. I think that I already have everything I really need except the specialized tool that is used to stiffen or unstiffen the preload setting depending on weight being carried. What is the generic name for such a tool? Can I buy one in an automotive store? What setting is recommended for a single rider of about 220 lbs?
Thanks for advice on this,
Ian in Lethbridge

[Bone]

This is the tool kit that was in my  98 Tourer  #4 is the shock adjuster.
This drawing came from HDL they might still sell the tools.

Yes they show a similar kit. The spanner is #6 for $6.26
006   SPANNER, PIN 89202-MT3-000   001   $8.13   $6.26

http://www.hdlparts.com/fiche_select2.asp?category=Motorcycles&make=Honda&year=2001&fveh=132119

[Thunderbolt]

Tool kit should be behind the battery under the seat.  By chance did you overlook it?

[Michvalk]

I got mine from a shop that sells dirtbikes. It was hanging on the wall

[Fiat Lux]

Thanks for the good word which is "pin spanner" --the shock adjusting tool. The previous owner removed the manual and tool kit to make room for a baby compressor that powers the air horns.
Ian in Lethbridge

[Former BMW Guy]

If you get someone to take the weight off the rear wheel you might be able turn them by hand. Mine weren't that difficult.

JP

[Brian]

If you dealt directly with the PO why not contact him to see if they are still available. If not, you maybe able to buy a complete kit off e-bay for about $25. The kit, if complete will give you just about every tool you will need to perform normal maintenance tasks. I picked up a second tool set just to have for the garage tool box instead of using the one under seat. They are handy to have when needed.