Valkyrie Riders Cruiser Club
February 10, 2026, 02:35:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Has anyone relocated the antenna like this before?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Has anyone relocated the antenna like this before?  (Read 1070 times)
Blaze
Member
*****
Posts: 83


Usa
« on: March 28, 2015, 05:50:44 PM »
Is this strong enough? I cut a slot in the back to slip over the bag guard.


Logged
sandy
Member
*****
Posts: 5447


Mesa, AZ.
« Reply #1 on: March 28, 2015, 06:52:32 PM »
It looks good but if it falls off, it wasn't strong enough. PS: I don't own an IS.
Logged
http://i982.photobucket.com/albums/ae310/sandyal55/ManCave.jpg
Jess from VA
Member
*****
Posts: 31095


No VA
« Reply #2 on: March 28, 2015, 06:59:27 PM »
Mine is in the same place but with a HD clamp to an aftermarket Firestick. 

Cannot see how that mounts.
Logged
Blaze
Member
*****
Posts: 83


Usa
« Reply #3 on: March 28, 2015, 07:02:08 PM »
Quote from: Jess from VA on March 28, 2015, 06:59:27 PM
Mine is in the same place but with a HD clamp to an aftermarket Firestick.  

Cannot see how that mounts.



I drilled 2 holes through the guard. And cut a slot in the back to go over the guard.
« Last Edit: March 29, 2015, 04:45:21 AM by Blaze » Logged
Highbinder
Member
*****
Posts: 1092


Bastian/Tazewell,VA.
« Reply #4 on: March 29, 2015, 05:11:32 AM »
I have my antenna mounted in the same area, but not to the saddlebag rail, it's mounted to the saddlebag splash guard with a extended steel plate to bring it out pass the guard...as far as strenght go's you should have no worry, my set up would be weaker then yours and I have no problem...drilling thru that saddlebag rail couldn't have been easy... Smiley
Logged
Blaze
Member
*****
Posts: 83


Usa
« Reply #5 on: March 29, 2015, 05:30:50 AM »
Quote from: Highbinder on March 29, 2015, 05:11:32 AM
I have my antenna mounted in the same area, but not to the saddlebag rail, it's mounted to the saddlebag splash guard with a extended steel plate to bring it out pass the guard...as far as strenght go's you should have no worry, my set up would be weaker then yours and I have no problem...drilling thru that saddlebag rail couldn't have been easy... Smiley

Thanks, that makes me feel better. It feels plenty strong enough. Drilling wasn't difficult. Just use an sharp bit and go slow and easy.
Logged
BobB
Member
*****
Posts: 1568


One dragon on the tail of another.
« Reply #6 on: March 29, 2015, 08:26:50 AM »
When I added a radio to my Tourer, i didn't want the typical mast on the rear.  I went with a powered antenna that is across the windshield...
Logged
jwinker
Member
*****
Posts: 80


St. Paul, MN, USA
« Reply #7 on: March 29, 2015, 06:13:56 PM »
Just finished installing my powered antenna under the fairing. So far, so good. Too bad it's cold, rainy, windy and all-around crappy outside today or I could see if reception was affected.
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS