My Valk project bike

[Flrider]

As some of you already know, I have been working on this project for some time now ( like 3 months time ) a lot more time than I originally thought it would take and it drove me "NUTS" cause I like to jump on things and get them done, life just kept getting on the way and had to find time to work on it

I was not looking for a project but when a neglected Attic Rat motor modified bike came along that could be had for the right price, I just could not pass it up.

So, a complete tear down for a fresh start with a bare frame and a chance to get motor blacked out, I like black motors 
Basically, I changed an Interstate to a Standard, I had 95% of the parts I needed in my parts stash including the wire harness and let me tell you, there are a lot of connectors that are different from the IS to a Standard and it is not as simple as it may seem.

Both fenders were dented so I cut them short but was not happy with the looks of it so decided to go the VTX front fender and spent a lot of time searching for a rear fender that had the needed measurements, found a swing arm mounted fender 

Some of the other add ons are a 4* triple tree, IS tank, Kellerman turn signals, Kuryakyn side mounted plate, Custom Dynamics tail light, 14" ape bars.
I did cut a corner as I was getting too anxious to get it done so decided for not doing the handlebars internal wiring until a later date. 

I am still not done in the paint department, was thinking of some sort of pin striping (red, silver) and/or possibly a catchy name in place of the tank badge, so if you have any suggestions, I am all ears.

So far I have done local rides and all is Ok, I really like the feel of the bike, completely different from the other Valks  and super light and quick




















Here are some of the pics of the process



Tried the short rear fender with adapted VTX fender rails


Blacking out motor

[Bighead]

Good job but dont forget to run only high test fuel in that Attic Rat special

[Jess from VA]

Wow Jack, that is a really nice job, and a nice bike (and post).  

Almost a military look (with the olive drab on black).  

That bike looks so smoothly subdued everywhere, I'd be real careful adding much of anything (and nothing bright).  Whatever it is, it will stick out (and draw the eye right to it) (so choose wisely).

Maybe some minimalist pinstripe, but I wouldn't add any color other than a subdued almost-match to the existing dark tones.  And a satin (not gloss).

EDIT:  Thinking of this further, IF you do a subdued pinstripe, I think a good color choice would be FDE (Flat Dark Earth).  After a fashion of this color scheme. (only in flat or satin)





The only other thing that comes to mind is some of the WWII aircraft nose art for the tank (although most of that was skimpy or no clothing gals, and probably not a good choice).  Or A10 warthog teeth (which has been done before, and pretty bright, but could be done subdued).

https://www.google.com/search?q=WWII+aircraft+nose+art&client=firefox-b&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiVjvyDuozcAhVOON8KHXFNCzsQ_AUICigB&biw=1424&bih=652



Or Norse Valkyrie themed.  (but it costs more money for this than striping)

https://www.google.com/search?q=norse+valkyrie&client=firefox-b&source=lnms&tbm=isch&sa=X&ved=0ahUKEwj3g-v1uIzcAhWwTN8KHesvADoQ_AUICigB&biw=1424&bih=652#imgdii=hU9Zzp1OFthWFM:&imgrc=87tq2_WiWEQ1hM:

Or a version of the dodge super bee.


Here's one any wife would love.  

[OLDFRT]

Lookin' GOOD, Jack. If I ever get money enough to buy/have built another Valkyrie, it will have NO bling on it anywhere. I don't want all of my bikes that way, but I would like ONE.

[Thunderbolt]

Looks great.  Lots of time involved there.

[sixlow]

Always impressed with your work Jack. What's the seat from ?, is there more rake to the front end ? For a tank decal how about "ATTACK" or "ATTIC ATTACK", maybe "BLACK ATTACK".  Do you plan to go dark side after you tear that tire up ?   

[flsix]

The newest project looks great just the way it is Jack.
Like the choice of tail light and location.

[2KVISRiderDan]

Nice job Jack! I like the "Stealth Bomber, oops Bobber" look. Maybe a subtle F6 B2 in battleship grey on the tank?

[Bronxboy]

Outstanding Jack !!   Dark Horse 

[Tourus]

    Dr. Jack has created another monster Great Job
   

   What are you trying to do to Larue he may lose a lot of sleep over this one
   
   Jack, you Larue and Nick really think outside the box and come up with fantastic bikes.
   Looking forward to seeing and hearing it.

[pocket aces]

Crazy  Mad  skills Jack. Can't wait to see it in person.
Check out a website: twisted chrome vinyl pinstripes. Might have something you are looking for.

[_Sheffjs_]

As Nick sad, Outstanding or I will add Paramount!  And then I think Sixlow had some thoughts on naming that work!  Two Questions: Is Edith home yet? Hence the rush. Ha ha. And are the German blinkers what you hoped? 

[larue]

Outstanding work as always jack 
It's just done right, good work brother

[Jess from VA]

This is probably the biggest bike decal, pinstripe, logo, yada site on the web.  Yeah, it has Harley in it's name, and a lot of Harley stuff, but a ton of other stuff too.

This is not so you can buy something of theirs, it's just to look at to get ideas (like my other links above).

http://www.purpleharley.com/
   

[larue]

   Steve tourus wrote :
What are you trying to do to LAURE, he may lose a lot of sleep over this one
   Jack, you Laure and Nick really think outside the box and come up with fantastic bikes.
   Looking forward to seeing and hearing it,will I need ear protection like they wear on airboats
[/quote]

Steve as you know I have two intestates and the dark blue one is getting bobbed out as we speak. Jack and I have talked about the projects and we went separate  ways with similar end results but different touches... It's almost done just few things and you'll get to see the reveal. I call mine the Dirt Bag   and learn how to spell my name right it's my handle dude  

[BCoy]

  Jack, great job!  Looking forward to checking it out soon.
Ride safe
Bill

[Farside]

  Really cool Jack

[Flrider]

Thanks for all the props guys, not many people know or understand Valkyries like we do.  

Thank you all for the suggestions, links and names, I will definitely look into each one of them and hope to come up with the right one.

Just to answer a few questions.

The seat is a Harley seat, project delayed at least 15 days because I could not find a seat that would look right, looked and looked and even tried a couple of seats with no success. I drove past one of our local bike shops and decided it was a long shot but decided to walk in and ask, they had a few used seats and this one was one of them. I like the fit and I was even able to make some brackets that will make it fit using the seat lock.

As far as MT and CT, I plan on going through this MT and then do a search for a CT that has a rounder edge and give that a try.

Front end is a 4* rake, good eye Sixlow

To answer Jerry's question about my wife, she is still not back from taking care of her mother but she knows about my weakness and asked me how the project was coming along. She is the best and very supportive wife  

Turn signals are german made by Kellermann, not cheap but I am very pleased with them. Thanks for pointing me in that direction Jerry  

[_Sheffjs_]

What do you see Professor? I see many Florida bikes making the calendar again Sherman!   

[Pappy!]

Got a Darth Vader helmet to wear with that? Nice job!

[Tourus]

  Steve tourus wrote :
What are you trying to do to LAURE, he may lose a lot of sleep over this one
   Jack, you Laure and Nick really think outside the box and come up with fantastic bikes.
   Looking forward to seeing and hearing it,will I need ear protection like they wear on airboats

Steve as you know I have two intestates and the dark blue one is getting bobbed out as we speak. Jack and I have talked about the projects and we went separate  ways with similar end results but different touches... It's almost done just few things and you'll get to see the reveal. I call mine the Dirt Bag   and learn how to spell my name right it's my handle dude  
[/quote]

Larue I modified my post and corrected the spelling of your name, sorry dude

[Squirrel]

Very nice work, Jack.  And in just 3 months time!  I'm very impressed.  Thanks for sharing the pictures.  I was just thinking about it the other day and wondered what it was going to look like.  Now I know.  I'm sure you will come up with a great name whether you put anything on the tank or not.  As for me, being fond of bright red, I still love your red Valk.  Take care, Jack.

[Steel cowboy]

Very impressive Jack, almost the kind of bike Batman would own. Hence "Bat Bike"

[Squirrel]

I've been trying to think of a name and came up with "Jax Toy".  However, that may be better on a license plate than on the tank.  Especially, if you ever sell it.  Heaven forbid.  Unless you happen to sell it to someone named Jack.  Just my 2 cents worth.

[_Sheffjs_]

Someone mentioned Black Dragon  Black Dragon

[Squirrel]

And yet another.  How about "BlackJack" with some sort of graphic?  Or "CheckMate" and some sort of graphic?

[Flrider]

Lots of great suggestions guys, thanks a lot, I am not very creative when it comes to the name thing  

So far I am liking this ones:

Nice job Jack! I like the "Stealth Bomber, oops Bobber" look. Maybe a subtle F6 B2 in battleship grey on the tank?

Someone mentioned Black Dragon   Black Dragon

I like this one also, someone posted an image on FB with a dark dragon that looked cool

And yet another.  How about "BlackJack" with some sort of graphic?  Or "CheckMate" and some sort of graphic?

Jerry also had a great suggestion with a graphic that he posted on FB, I just can't figure out how to make it work.


THANKS AGAIN FOR THE IDEAS, KEEP THEM COMING, LUNCH ON ME FOR THE WINNER  

[Squirrel]

Jack, when you paint everything black, what brand and kind paint do you use?  Do you use a different hi temp paint on the engine?  Also, do you do anything special to the chrome pieces before you paint them?

[Flrider]

Jack, when you paint everything black, what brand and kind paint do you use?  Do you use a different hi temp paint on the engine?  Also, do you do anything special to the chrome pieces before you paint them?

Engine: I use the high heat engine rattle can paint from auto parts, this is my 5th engine and have had great results lasting for years with no issues, just have to prep by cleaning it really good before applying paint.
Use whatever sheen you like.

https://www.autozone.com/paint-and-body/engine-paint/vht-paints-satin-black-high-temperature-engine-enamel/465328_0_0 store

Fenders, tank and side covers: took them to a body shop.

Metal parts: powder coated

Plastic chrome: just cleaned with denatured alcohol and used the flexidip stuff from Home Depot, I have had great results with it, lasting a long time without even having to retouch, have some parts like that on the other bikes.
Get the Rust-oleum  stuff, better than other brands.

Calipers: Caliper rattle can from out parts store.

[Bighead]

 BLACK BETTY

[BCoy]

  Great choices, I look forward to the selection and reveal!  Ride safe.
Bill

[Squirrel]

Sorry Jack, but I keep thinking of names.  How about "Jumpin' Jack Flash" as in the song by The Rolling Stones?  I keep thinking about that free lunch! 

[larue]

How about Black Hawk ....

[_Sheffjs_]

Black Jack with spades near by.

[Farside]

  Very cool Jack. How about something like " BLack At U"  Yep Yep! 

[Jims99]

Bike looks awesome. Black bikes matter. LOL
I like black hawk done in a dark military green letters with a bullet whole or two. Bikes got that bad ass look.

[Flrider]

Lots of great ideas guys

Choosing a name/graphic is becoming harder than I thought  ???

I looked into black Jack with spades but the spades might get affiliated with a certain group of bikers.

Thanks again for all suggestions.

[Farside]

Very cool Jack. How about something like " BLack At U"  Yep Yep! 

Most orginial maybe? Play with it and see. F6Black@U    ???? 

[larue]

I need to win that lunch jack

[CB]

Wow Jack!! That is cool. I hope to see it on the road at some point. Good job!!