Inzane 17

Anyone ever use silicone type radiator hose?

Started by John Schmidt, Fri 30, Nov 2018, 13:27:10

Previous topic - Next topic

John Schmidt

Since I'm in the middle of an extensive maintenance project on the Valk, my 20 yr. old hoses are getting replaced. Been looking at the colorful FlexFlab silicone base hoses and wonder if anyone has ever used it. It appears the necks the hose slips over are ~27mm, which is just a tad over 1" wide....something like 1.06" which isn't a very big tad. The ID of the hoses appear to be about the same size but are stretched a bit at the connection point. I thought some yellow hose might add a bit of color along with the yellow sparkler wires.  ;)

old2soon

          Fer what it's worth John the last couple years I drove 18 wheeler before I retired all my big trucks came equipped from the factory with all silicone hoses in the cooling/heating system. Don't Know if this are Any help but there ya go!  :roll: RIDE SAFE.
Today is the tommorow you worried about yesterday. If at first you don't succeed screw it-save it for nite check.  1964  1968 U S Navy. Two cruises off Nam.
VRCCDS0240  2012 GL1800 Gold Wing Motor Trike conversion

knockdolian

I have old cars and run silicon hoses where ever I can. Nothing better in my opinion

9Ball

I just replaced my 20 year old hoses with oem.  I looked at the silicone, but figured I won't be riding in another 20 years even if I'm still on the planet... :D

Made it an easy decision...

Good luck.
VRCC #6897, Joined May, 2000

1999 Standard
2007 Rocket 3
2005 VTX 1300S

98valk

a race track item. not cost effective for street use, plus special clamps are needed.

unless one has $$$$ that they don't know what to do with.
1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798

da prez

  John , there is a special hose clamp for silicone hoses. Standard clamps will work , but the coating will ooze thru. A silicone specific hose clamp has a shield on the inside that stops it from happening.
 Do not over tighten. We (used to ) torqued them when we did an install.

                                          da prez

John Schmidt

Quote from: 9Ball on Fri 30, Nov 2018, 15:24:53
I just replaced my 20 year old hoses with oem.  I looked at the silicone, but figured I won't be riding in another 20 years even if I'm still on the planet... :D

Made it an easy decision...

Good luck.
I'm with you on that, guess I'll order some OEM unless I can find something for a car that's close enough in fit. I'd love to be still riding another 20 years but not too many in triple digits still doing that.  ;)  I'll be happy with another 7-8, Lord willing.

Gryphon Rider

I'd rather try to hide the ugly parts of my motorcycle than highlight them.  I'd rather not use chrome wire wrap or chrome door edging on my gas tank seam, and I'd rather my hoses were all black.