News:

If you're new to this message board, read THIS!

Main Menu
VRCC Calendar Ad

Velocity stacks

Started by _Sheffjs_, Mon 28, Jan 2019, 07:38:42

Previous topic - Next topic

_Sheffjs_

Don't ask price! Big coin I'm sure, if someone reproduced them would you want them?  I have a friend over seas in talks to make them.  Only looking for ones that really want them at this point.


vanavyman

Currently looking for a set.
2015 Red GL1800 Level 4 w/2015 Tailwind Trailer
1999 Valkyrie Custom Interstate w/2006 Bushtec Roadstar Trailer
2000 Valkyrie Interstate Roadsmith Trike (Wife's)
Member Number 33081




rocketray

well....they are very useful --especially with some nice wire mesh bubble  screens --to drive every..most every Harley owner into an uncontrolled urge to mash the screens which look really cool..they just can't stand looking at something that accentuates the already monster motor :cooldude:.. and fool  some folks into thinking it is fuel injected

Gavin_Sons

Buy them from advanced auto and use 3m tape to attach to the carb caps. No one but you will know the difference

Titan

Dang! That price! They're right proud of those things!

I had them on my bike before I sold it and I think I might still have them in the storage room in the garage. Treasure!

The emperor has no clothes

Quote from: Titan on Mon 28, Jan 2019, 19:49:01
Dang! That price! They're right proud of those things!

I had them on my bike before I sold it and I think I might still have them in the storage room in the garage. Treasure!
You should put them in our classified. I'm sure you'd get lots of interest.  :cooldude:

Hook#3287

I never saw the attraction.  Added weight and $$ w/o additional performance.

But, then, I've got a chrome luggage rack I never use  :roll:

They are chrome though   :)

They look cool and most don't know their just bling.


knockdolian

Quote from: meathead on Mon 28, Jan 2019, 20:14:04
Quote from: Titan on Mon 28, Jan 2019, 19:49:01
Dang! That price! They're right proud of those things!

I had them on my bike before I sold it and I think I might still have them in the storage room in the garage. Treasure!
You should put them in our classified. I'm sure you'd get lots of interest.  :cooldude:
Someone in the classified section wants a set

old2soon

Quote from: rocketray on Mon 28, Jan 2019, 19:16:26
well....they are very useful --especially with some nice wire mesh bubble  screens --to drive every..most every Harley owner into an uncontrolled urge to mash the screens which look really cool..they just can't stand looking at something that accentuates the already monster motor :cooldude:.. and fool  some folks into thinking it is fuel injected
Some one-cain't recollect who-mentioned to me in passing as a question-3 cylinders? He was looking at the right side of Phatt Ghurl. And as innocently as I could muster-ya might wanna look at the left side-I have 3 more over here!  :roll: Ross-da prez-fabbed up some Dragon Heads to go on the top of my carbs-only four as neither one of us wanted to modify the side pods. da prez has 6 Dragon heads on his. Every one of us here has a vision of what Our Ride should look like. Functional or not it IS up to the owner of said ride what They desire to be on Their Ride. RIDE SAFE.
Today is the tommorow you worried about yesterday. If at first you don't succeed screw it-save it for nite check.  1964  1968 U S Navy. Two cruises off Nam.
VRCCDS0240  2012 GL1800 Gold Wing Motor Trike conversion

SCain

Quote from: Hook#3287 on Tue 29, Jan 2019, 03:54:48
I never saw the attraction.  Added weight and $$ w/o additional performance.

But, then, I've got a chrome luggage rack I never use  :roll:

They are chrome though   :)

They look cool and most don't know their just bling.




I always thought they were just a place for dirt and rain to collect, but they do look cool with red of ?? color of LED's at night.
Steve

Titan

Quote from: Hook#3287 on Tue 29, Jan 2019, 03:54:48
I never saw the attraction.  Added weight and $$ w/o additional performance.

But, then, I've got a chrome luggage rack I never use  :roll:

They are chrome though   :)

They look cool and most don't know their just bling.



That's hilarious! I found that I do still have the set stashed away in the garage. Since you commented on the added weight, I weighed them and found they are 2 oz each for a total of 12 ounces. That might cause you to lose a drag race with a Hayabusa if you add them to the 800 pound Valkyrie!

Titan

Quote from: knockdolian on Tue 29, Jan 2019, 06:36:13
Quote from: meathead on Mon 28, Jan 2019, 20:14:04
Quote from: Titan on Mon 28, Jan 2019, 19:49:01
Dang! That price! They're right proud of those things!

I had them on my bike before I sold it and I think I might still have them in the storage room in the garage. Treasure!
You should put them in our classified. I'm sure you'd get lots of interest.  :cooldude:
Someone in the classified section wants a set

I had forgotten that I still had the set until I saw this thread.
I probably will offer them for sale but don't have time to deal with it at the moment. I need to find out exactly what they're worth. Wife is going to find the original receipt.

spongebob

Me and my better half was at a rally in Mississippi a few years ago.
I was down from my Valk about 2 bikes down talking to a friend of mine.
My better half pointed toward the Valk, I turned and seen a couple of guys looking at my
2003 STD. It has the Vel stacks....

One of the guys told the other one, See those? This guy added those to his bike.
I read in a motorcycle mag, that this increases HP about 10HP.

See, He read it too....... :crazy2:

Hook#3287

Quote from: Titan on Tue 29, Jan 2019, 11:45:36
Quote from: Hook#3287 on Tue 29, Jan 2019, 03:54:48
I never saw the attraction.  Added weight and $$ w/o additional performance.

But, then, I've got a chrome luggage rack I never use  :roll:

They are chrome though   :)

They look cool and most don't know their just bling.



That's hilarious! I found that I do still have the set stashed away in the garage. Since you commented on the added weight, I weighed them and found they are 2 oz each for a total of 12 ounces. That might cause you to lose a drag race with a Hayabusa if you add them to the 800 pound Valkyrie!

2 OZ!!   Shirley you jest.   I would have bet they went 3-4 oz each minimum  :o

_Sheffjs_

I suppose there is not many that are interested in a set if re-made.   :P

Ken aka Oil Burner

Quote from: _Sheffjs_ on Wed 30, Jan 2019, 17:13:01
I suppose there is not many that are interested in a set if re-made.   :P

I think most that want(ed) them already have them, or the going used prices turned them on to the pod filter setup.

JimC

Jerry,
I have also been thinking of the Velocity tubes. There is no way I would pay the prices they are going for now days though.
I have looked on Ebay ad other sites and found some aluminum velocity tubes that would take a high polish, but have not investigate4d further.
My son in law's family own a steel fabricating, welding, machine shop, and I was thinking of trying to find a used or tarnished one that he could copy in order to get a price. One of their machines is called a hydraulic stamping machine, they stamp parts for the aviation industry out of stainless steel that have to be quite close in tolerance's. The issue would not be the cost of material,  be it stainless or aluminum, but would rather be the cost of making the form or die to stamp them out of.

Jim
Jim Callaghan    SE Wisconsin

_Sheffjs_

I have a Norwegian friend that says he has 14 people there interested and he is working out the final details with someone that can manufacture them.  Hoping it all works out and these can be available. 

Pappy!

Would like a set for mine. Can't have Lesa out bling me with hers!

baldo

Jerry,

I could be persuaded to spring for a set if not too dear...

Bob

_Sheffjs_

Ok  noted   I will give out more info when time comes.  I will not make any money in this at all if it is a workable situation.   

Glaserbeam

Is it correct that they won't work with an Interstate tank?  If someone is making them from scratch, can they be designed to work with the Interstate?
Ken

Jess from VA

#25
They will work with the IS tank, but apparently you need to shim the front of the tank up (at the bolt) with a spacer of some kind.  Around a quarter inch?



Just to clear the front stacks on each side.

Big BF used to sell the spacer, but his website is partially down now (on his parts).

The emperor has no clothes

Quote from: Jess from VA on Thu 31, Jan 2019, 15:02:16
They will work with the IS tank, but apparently you need to shim the front of the tank up (at the bolt) with a spacer of some kind.  Around a quarter inch?



Just to clear the front stacks on each side.
My spacer is 1/2" .

The emperor has no clothes

Quote from: Glaserbeam on Thu 31, Jan 2019, 14:37:16
Is it correct that they won't work with an Interstate tank?  If someone is making them from scratch, can they be designed to work with the Interstate?
Ken
Along with the spacer under the front tank mount, you'll need to add to the rubber cushions on the frame that the tank sits on. Mine has some split radiator hose under the stock cushions.