News:

If you're new to this message board, read THIS!

Main Menu
Inzane 17

Leaky radiator hose

Started by dbyer58, Mon 22, Apr 2019, 14:49:53

Previous topic - Next topic

dbyer58

Hello

I noticed my upper radiator is leaking where it connects to the engine.  I ordered a new hose and plan on putting it on soon. Is it as easy as it looks? Drain the antifreeze...pull off the radiator (easy I hope)  and install the new hose. Anything I should know before I start this job?   Thanks all!!!

Chrisj CMA

Yes, you should know this is not uncommon and usually fixed by just tightening that clamp. No need to drain the fluid, no need to remove the radiator. Just take out the one bolt at the top, tip it forward and reach in with a socket extension and tighten the clamp.

Bighead

1997 Bumble Bee
1999 Interstate (sold)
2016 Wing

indybobm

Using a 1/4" rachet and  long extension I was able to tighten the clamp without removing anything. I did epoxy the socket on first to keep it from disappearing.
So many roads, so little time
VRCC # 5258

Bighead

Plus if you start it and let it warm up it will more than likely stop leaking without tightening the clamp.
1997 Bumble Bee
1999 Interstate (sold)
2016 Wing

dbyer58

.I never noticed it leaking untill i took it out this spring after winter storage. only a couple drips per day .  Still havent started it yet. Ill give all the suggestions a try. Thanks