Freedom Performance exhaust pipes for 14-15 Valkyrie

[borivalkyrie14]

Hello guys, so how many of you already bought the pipes or is thinking on buying.

[dans2014]

This is a scam. I called them and nothing nor will there be. Ban the dude that started this

[Jack B]

There is a website for Freedom Exhaust. It looks  legit to me.
So what's the real story?
https://freedomperform.com/?fbclid=IwAR0Arm4Y2_UzIwqVV6aYZpKCa1sY6HK2Sayecarrl3kJr12tJQVZly-AR6A

[bscrive]

This is a scam. I called them and nothing nor will there be. Ban the dude that started this

I don't know whom you talked to, but the Valkyrie exhaust is on their Facebook page.  

I think you need to take a step back and do some investigation before you call someone a liar.  I think someone needs to apologize.

The price is $1400 for a full system.

I would not pay that much for a set of pipes.  I realize that the price reflects the limited quantity that they will make.  My Rush pipes only cost me $100 used and the Torq Loopz were $359.

[dans2014]

Called Freedom sales and they know nothing. You must be stealth!

[borivalkyrie14]

Thanks for calling me LIAR, so I went all the way to California and came back with my bike with new pipes made at Freedom Performance facility in Corona, CA.


But I don't care about ignorant people, there are the pictures and the video that I did.

[borivalkyrie14]

Also as I know the pipes cost le $800.00 for the chrome slipons.

The black ones, I don't know if there more.

[dans2014]

Yep. Whatever you say

[bscrive]

Give it up Dans,

https://www.facebook.com/pg/freedomperformanceexhaust/posts/

[dans2014]

Wonder why when you call they know nothing? Hummmmmmm

[bgreat]

I stopped in at Freedom Performance last Friday (9-Aug-2019). The pipes are real, but not generally available at this time. As I was told, the design has been completed and has been sent out for production. They are expecting to have pipes available for sell in 4-6 weeks. Pricing and options have not been set.

I live in Corona and they are about 5 minutes from my office, so I will be getting regular updates on the status which I will share with the list.

Enjoy!
Bill

[Robert]

Current argument not withstanding changing the exhaust is a exercise in futility, if the idea is to get more power. As for sound you can changing it slightly by getting the pipes in the link below.




https://www.torqmasterpipes.com/

[bgreat]

TorqMaster = "Not available for sale in California"

And less than hour away from me... So, I have to consider alternatives.

Enjoy!
Bill

[Hot Rod]

Current argument not withstanding changing the exhaust is a exercise in futility, if the idea is to get more power. As for sound you can changing it slightly by getting the pipes in the link below.




https://www.torqmasterpipes.com/

Agreed ! Honda pretty much gets the most from what they have..... Most Honda bikes get about 3-5 HP from spending a grand ......Not very good investment practices for sure. I drilled my pipes & had them ceramic coated .....couldn't be happier.

[dans2014]

What do you mean by drilling your pipes? Thanks

[Hot Rod]

What do you mean by drilling your pipes? Thanks

Look at the exhaust, there are 3 pipes on each side but out of the 3 pipes, the bottom one is totally open, the top 2 pipes are blocked off with sheet metal...This has been experimented with at length.....Most have decided that cutting a 1/2" hole in each of the dummy plates got the best sound. A little deeper at idle & a little more scream WOT ....... I did this to mine ,No leaky exhaust sound & not too loud or drone .......Don't go too deep as there is yet another plate behind the first.

[gottaboxer]

Do you have a picture of the powdercoated pipes?

[Hot Rod]

Do you have a picture of the powdercoated pipes?

[dans2014]

This has been covered before. Last guy who drilled them out said it sounded awful

[Hot Rod]

This has been covered before. Last guy who drilled them out said it sounded awful

He probably went through both layers {too deep} ......NO awful sound here .....Just a little bit deeper & a tiny bit louder .....No drone. READ carefully ,1/2" holes only , first layer of sheet metal only. Drill them all the way out with large holes & I'll bet they sound raspy with the dreaded drone !