Where to buy intake runner o-rings.

[Davemn]

Mine are pretty flat and disintegrated. Auto Zone? Honda Dealer?

[RonW]

I bought mine's from an oem parts site, with other items to save on shipping.

[Ken aka Oil Burner]

I have used Redeye with great results. https://redeye.ecrater.com/

[Davemn]

Got it. Thanks

[old2soon]

        Carolina Bike and Trike. Also have the rear end O-rings at decent price points. RIDE SAFE.

[Bagger John - #3785]

If you have an Ace Hardware nearby, you can get #123 O rings from their plumbing department for use in a pinch - around a dollar each.

When last pinched, mine were on the bike for about 10 years...upon removal this year they looked brand-new, though I replaced them with the Redeye parts.

[Davemn]

Years ago I bought o rings from some auto parts store. These are the o rings I am replacing. They were partially melted. They were intact in the groove but were clearly not in perfect condition. So I'm back to OEM replacements. Thanks.

[Chrisj CMA]

Buy Viton o-rings and never worry again. They last forever

[Calboy]

Buy Viton o-rings and never worry again. They last forever

What he said

[Gnarly]

Amen. What they said.

[JohnG]

You guys want to get rid of intake o-ring leaks? I ordered new o-rings took one look at them and put them in the trash. Went to the auto parts purchased a roll of gasket material for about $7.00 and made my own gaskets. If you look at the sealing surface between the head and intake there is plenty of sealing surface. Works good for me.

Good luck guys

[Chrisj CMA]

You guys want to get rid of intake o-ring leaks? I ordered new o-rings took one look at them and put them in the trash. Went to the auto parts purchased a roll of gasket material for about $7.00 and made my own gaskets. If you look at the sealing surface between the head and intake there is plenty of sealing surface. Works good for me.

Good luck guys

Or just put Viton o-rings in and be done. I've done several bikes including mine over the years. Perfect and forget about it.