Here I go again, My pod light mod

[Steel cowboy]

https://i.postimg.cc/6qnS7tyj/0-CCB8777-56-D7-4-A2-A-81-F4-544530278-AC5.jpg
https://i.postimg.cc/Y94TH1kw/959-FDE77-442-E-45-F5-97-A6-83-C137-CBA766.jpg
https://i.postimg.cc/W3QCbhbq/8-BE81-A94-7-FF4-4996-91-CA-CB214-AEA4-D90.jpg
https://i.postimg.cc/bvV4Wm7T/E042-CF63-F9-A4-4-F4-E-A39-C-3-A758-A164587.jpg
Sorry but can't get pics to show.
first and third are pod light with shield removed and led installed
Second and forth are shield in and led reflecting out from under shield
Next I will show them installed. These pods came off my donor interstate that is becoming a Super Valk. The left side pod had a water temp gauge that I'm changing out for a volt gauge and one more switch for the constant fan on. It's better to make do than repair the three cut outs
I'll keep trying to post picks I'm sure I'm one step away lol

[John Schmidt]

It's easy with Postimage. Open the picture you want to post and put the cursor on it. You'll see two icons at the top of the pic....a "v" laying down and a trash can. Click on the V and it opens another box with five choices, you want the second from the bottom. Put the cursor on the icon at the far right and left click, it will then say "copied". Now put your cursor on your post where you want the picture to show and right click. The location will show so now Preview and your picture will be there. You don't have to copy/paste anything, the site does it for you. It's basically three clicks and your picture is posted. Click on the "v", click on the second from bottm line on the next screen, click on your post.

[Steel cowboy]

Thanks John I got it to work, finally!!  Lol