VRCC Calendar Ad

Valkyrie interstate brake pads part number

Started by Savago, Thu 30, Jan 2020, 18:49:25

Previous topic - Next topic

Savago

Gentlemen

My I/S@1999 needs some new front brake pads and looking into partzilla (https://www.partzilla.com/catalog/honda/motorcycle/1999/gl1500cf-a-valkyrie-interstate/front-brake-caliper), it is listed with 2 part number codes:

a) 06455-MV4-405: https://www.partzilla.com/product/honda/06455-MV4-405
b)  06455-MZ0-760: https://www.partzilla.com/product/honda/06455-MZ0-760

Do I need 1 of each?

While at it, how hard of a job is it to replace the pads?

Best regards

Savago

The emperor has no clothes

I'm not sure why they have 2 different numbers. Sometimes Honda changes them, but they will usually show the old number as not available. You need 2 sets. You can find them much cheaper though. I think I get both fronts and a rear for about $40 total. If you've changed pads on a car, you can easily do it on your bike.

Savago

@meathead: do you mean that probably they are the same/similar part, but only with 2 different part numbers?

If so, would buying 2x of a single (either 'a' or 'b') would be enough?

The emperor has no clothes

Quote from: Savago on Thu 30, Jan 2020, 20:15:42
@meathead: do you mean that probably they are the same/similar part, but only with 2 different part numbers?

If so, would buying 2x of a single (either 'a' or 'b') would be enough?
Yes, I believe so. Although I suspect one number might be discontinued. If so, you might be delayed in getting them. If you are set on OEM, I'd cross check with another parts company and see what they list.

Hook#3287

I believe Honda updates the numbers for whatever reason and the parts companies leave the originals up, probably for cross reference.

I've ordered parts using the original numbers and the parts company has changed them to the new numbers automatically.

Hook#3287

QuoteWhile at it, how hard of a job is it to replace the pads?

http://www.valkyrieriders.com/shoptalk/bongopads.htm

Not hard, but does take some skill and knowledge.


ridingron

The parts fish I order parts from also has the 2 numbers listed. However, the ....760 number is crossed through and the ....405 number is listed.

item #2

https://www.partsfish.com/oemparts/a/hon/506c2f6ff870023420a31b53/front-brake-caliper


The emperor has no clothes

Quote from: Savago on Thu 30, Jan 2020, 22:29:30
This seems to be a full set and goes for 29.99 + free shipping:
https://www.amazon.com/Zinger-2013-2015-Suzuki-2012-2014-Replacement/dp/B07VXG1LXX/ref=sr_1_2?keywords=06455-MZ0-760&qid=1580444878&sr=8-2

What you guys say?
Those might be correct, but they don't list the Valkyrie as fitting them. Which would make me hesitate. I'm sure some will speak up about using cheap pads. I've been using them for many, many miles with zero issues.
https://www.amazon.com/dp/B078QYWD21/ref=psdc_404700011_t2_B078R32N1P

Jess from VA

When considering cheaper (and non OE) brake pads, check the prices on new rotors.

The emperor has no clothes

Quote from: Jess from VA on Fri 31, Jan 2020, 00:12:28
When considering cheaper (and non OE) brake pads, check the prices on new rotors.
Organic material pads should be used. There is no extra wear with them.

Savago

Quote from: ridingron on Thu 30, Jan 2020, 22:40:29
The parts fish I order parts from also has the 2 numbers listed. However, the ....760 number is crossed through and the ....405 number is listed.

item #2

https://www.partsfish.com/oemparts/a/hon/506c2f6ff870023420a31b53/front-brake-caliper

Received a msg from partzilla saying that, indeed, 760 was superseded by 405.