Interstate llner removal

[0leman]

Finally burned out a light on my Interstate trunk.   From what I can tell I have 14-15 screws to remove to take out the liner to so I can get to the lights, RIGHT?  I did do a search for the replacing the bulbs, but  didn't find anything on the subject.

I am not planning on going with LED's, just replacing the existing bulbs with those like the ones in there now.   I probably will replace all the bulbs at this time due to difficultly in getting to them.  There are two different bulbs, two are just running lights, two are running/stop lights.

[Skinhead]

You do not have to remove the liner to replace the lights.  There are 2 phillips head screws for each tail light on the inside of the trunk that hold each of the light assemblies in place.  Open the trunk, remove the screws and the lights can be removed from the trunk.

[old2soon]

You do not have to remove the liner to replace the lights.  There are 2 phillips head screws for each tail light on the inside of the trunk that hold each of the light assemblies in place.  Open the trunk, remove the screws and the lights can be removed from the trunk.

Man from Michigan be right!  Course had you done the Bons L E D upgrade No more worries!  RIDE SAFE.

[0leman]

thanks for the info.

I looked at the manual, nothing on how to access the lights.

Next problem will be finding the bulbs with the shutdown.   AH, not really.