News:

If you're new to this message board, read THIS!

Main Menu
Inzane 17

Chrome Fog LED light

Started by Relax, Thu 07, Jan 2010, 11:05:29

Previous topic - Next topic

Relax




http://cgi.ebay.com/ebaymotors/Chrome-Fog-LED-light-GL-honda-goldwing-valkyrie-gl1500_W0QQcmdZViewItemQQhashZitem439c76a122QQitemZ290387829026QQptZMotorcyclesQ5fPartsQ5fAccessories


I am about to install this light.
The light come without any note of wattage, ampere consumtion, anything, but I assume they are very low wattage (?)   The only thing I can read on ebay-add is they are made for 12 V.

I plan to connect them to work together with the full light to encrease my visilibility  both daytime and night.




Once i read the wire & switches on the Valk have the capacity for 90 or 100W headlamps. I run a 60 W lamp ( 55 ?)  Does that mean I can connect these LEDs to the wire for the headlamp without reley or anything, and they will just swicth on when I switch the full light on !?




Warlock

Most led light pull very little. You could hook them into your low beam circuit and only come on when you put the low beam on. Let us know how they do at night.
David

I don't want to hear the labor pains, I just want to see the baby

X Ring

Be safe.  Use a relay.

Marty
People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           

Colin

Please post a photo when you have them fitted as I am considering getting a pair of these.
Colin
Retired and living in Spain and riding my bike most weeks due to the great weather here.
VRCC Espana
My Bumble Bee re-build

daytona

Are they bigger than a turn signal?
Just started!

Bladedog

Quote from: Colin on Thu 07, Jan 2010, 15:33:21
Please post a photo when you have them fitted as I am considering getting a pair of these.

I'd like to see how you mounted them as well.  I get a lot of fog here on the CA coast and I just gag when I see the price of a decent light bar.
It's easier to get forgiveness than permission. 

John U.

I bought the 48 LED lights from the same company. I plan to mount them on the upper part of the crash bar and wire them direct. IMHO the current draw is so low it's not an issue.
I'll try to find out just how low.

John U.

According to Custom Dynamics (who sells a lot of LEDs) each led in their clusters draws about 26milliamps. So 26x18=468x2=936. So the answer is about 1 amp combined draw for both lamps. I have both Custom Dynamics and Harrison Specialties lights.
They look the same and appear to throw the same amount of light so I think the current draw would be comparable.
Hope this helps.

Relax



Thanks guys!

It's minus 10 F and 25 inches of snow here, so I am not about to install right now. My bike is at a stock house though
BUT, I'll go there next week to take a look about it and will take pics.
I'll keep you posted..

The light are some smaller than original turn signal lamp. The LEDs are also available mixed with amber diodes mixed with clear light, so i guess one could replace original light and get both fog light combines with turnsignal?


Gryphon Rider

Quote from: Bladedog on Thu 07, Jan 2010, 17:43:58
I'd like to see how you mounted them as well.  I get a lot of fog here on the CA coast and I just gag when I see the price of a decent light bar.

I would be very surprised if the light pattern is actually comparable to a proper "fog" light.  The fluted lenses of a fog light make a light pattern with a sharp horizontal cutoff so you light the road, not the fog.  LEDs have a tight (but not sharp) round light pattern, more typical of a spot light than a fog light.

Relax

Quote from: Gryphon Rider on Sun 10, Jan 2010, 08:46:29
Quote from: Bladedog on Thu 07, Jan 2010, 17:43:58
I'd like to see how you mounted them as well.  I get a lot of fog here on the CA coast and I just gag when I see the price of a decent light bar.

I would be very surprised if the light pattern is actually comparable to a proper "fog" light.  The fluted lenses of a fog light make a light pattern with a sharp horizontal cutoff so you light the road, not the fog.  LEDs have a tight (but not sharp) round light pattern, more typical of a spot light than a fog light.


I agree with you. I have only connected it to see the shine today and what you say is my impression too. I'll return on this later when i have it installed.

My reason for purchasing these lamps is not to use them as fog lights, but use them as an addition to my hi light to be more visible ( hopefully) in daylight.  I hope the clear ,white shine will make me more visible. I have been thinking about hi light modulators an other stuff, but I wanted to try this..

I add a pic where i compare the size to the signal lamp.



The lamp is not connected to voltage during this pic, even if it may look like it .