18-4133 Fuel valve.

[idaida98]

Well on recomendations by a few on this site I purchased this valve a while back and changed it today. I wish I could say I had sucess but upon trying it while still on the bench I found it to leak at all points on the switch I contacted the ebay seller and am waiting for a reply.I will report back.

[sandy]

Is it a real Pringle or a knockoff.

[Knapdog]

Is it a real Pringle or a knockoff.

My favorite is Sour Cream & Onion. 

But you can't beat "real" crisps made from 100% potato.

[hubcapsc]

I just googled it... it looks like an OEM knockoff...

Most OEM petcocks can be rebuilt to like-new with
a "cover set" (16953-MBZ-B51) and a new filter (16952-MZ0-003)...

-Mike

[idaida98]

This is not a pingle. This was supposed to be a valve  that would replace the original so I could use the original chrome honda switch. It was from a 95-98-CBR-600F3

[sandy]

Darn spell check got me again. I use to be a great speller till spell check came along.

[Bighead]

This is not a pingle. This was supposed to be a valve  that would replace the original so I could use the original chrome honda switch. It was from a 95-98-CBR-600F3

Still bet it is not Honda OEM part no matter what bike it is for.

[steveB (VRCC UK)]

18-4133 is a K & L Supply part no. Honda part no for the CBR600 is 16950-MAL-602. (One is 3 times more expensive than the other) Pingel is 1311-CH.

[Madmike]

18-4133 is a K & L Supply part no. Honda part no for the CBR600 is 16950-MAL-602. (One is 3 times more expensive than the other) Pingel is 1311-CH.

K&L make two versions of this petcock that are direct interchanges for the OEM petcock.  One is full manual manual, the other is manual and vacuum operated, both allow use of the stock Valkyrie petcock valve operating handle.

[Avanti]

Honda part, three times more expensive but no leaks.

[idaida98]

MadMike I think it was your post that got me to buy the petcock and I haven't heard a word from the seller I bought it from. Oh that's fleabay for ya.

[h13man]

   
Honda 16950-MAL-601 PETCOCK ASSY. CBR600 95'-98' Service Honda $54 Same as Valk but no vacuum assist. Over half the cost of a PINGLE  and appears stock if like the stock look. Mine had a Pingle when I bought it. A little awkward location but manageable switching to reserve on the fly.