Inzane 17

1999 valkyrie interstate trailer hitch

Started by kenberma, Tue 04, Jan 2022, 10:19:50

Previous topic - Next topic

kenberma

Hello, I'm looking for plans for a trailer hitch for a 1999 Valkyrie Interstate.  I've seen this posted elsewhere but I'm unable to open the plans.

The bike came with a Unigo trailer and hitch, the hitch is bent and causes the trailer to ride tilted wearing out the tire. I would like to replace the hitch with something a little more robust.

Thanks!

sandy

Hitchdoc makes the best hitch for a Valk. Also, one of our members made them as well. You can't get better than a chrome Hitchdoc.

Chrisj CMA

Quote from: meathead on Tue 04, Jan 2022, 23:06:31
I thought the unigo trailers had a different hitch. Not a trailer ball or receiver hitch ?

Yes they have a special connector but you still need a hitch to mount it on

kenberma

the unigo doesn't use a ball, it has a special receiver for the trailer but you can buy an adapter. my issue was that the hitch framework was damaged so the receiver was angled instead of vertical causing the trailer to ride at an angle. 
i'm more concerned with strength than appearance and was hoping to build my own if anyone had plans.

da prez

I have one hitch left on the shelf.

       da prez

Tim R

Here is a link to my post on Face Book Valkyrie page that shows my custom hidden inside the fender hitch if it will help you or give you any ideas. 
https://www.facebook.com/groups/2232984346/search/?q=hidden%20hitch

Puddle jumper

how much for your hitch, I bought one a few years ago from you and I'm in need of another


MarkT

Quote from: kenberma on Wed 05, Jan 2022, 09:00:27
the unigo doesn't use a ball, it has a special receiver for the trailer but you can buy an adapter. my issue was that the hitch framework was damaged so the receiver was angled instead of vertical causing the trailer to ride at an angle. 
i'm more concerned with strength than appearance and was hoping to build my own if anyone had plans.

Hmm.  Without seeing it, I'd bet a dollar to a donut any metalworker could bend it back then add welded reinforcement so it doesn't happen again. Assuming it's not mangled beyond repair.  Pretty sure I could do that if you were local, for a nominal fee.  As for me, I use a Hitchdoc.  Yeah I know, not a Unigo but it is quite sturdy as well as good looking.  Mine has a custom swivel hitch so I can ride the twisties aggressively. 




Vietnam-474 TFW Takhli 9-12/72 Linebckr II;307 SBW U-Tapao 05/73-4