carburetor inlet dia.

[turtle254]

Can't seem to find what the carburetor inlet size in mm is, where the air box boots connect.
1500 std

[Mooskee]

The bore is 28mm. If you want the OD, I can go out to the shop and measure one for you.

[turtle254]

The bore is 28mm. If you want the OD, I can go out to the shop and measure one for you.

Please, just the inlet size from the air box. Looking at maybe changing to cone shaped separate air cleaners. Thanks

[Mooskee]

The Funnel Setting Plate, the part that the rubber tube connects to, has a small ridge around it to help secure the rubber tube. That ridge measures 1.878 inches, (4.77 cm) (47.7mm).

[turtle254]

Thanks, That's what I needed.

[Mooskee]

You are welcome. Post your project and results on here. We will be interested to see how it turns out.

[RonW]

I second that!