How to use Radio Buttons/add Cruise to CB Buttons

[71dartswinger]

I don't have an owners manual. Is there anywhere that will tell me how these buttons are supposed to work? I don't have the cb. Is it possible to talk to your passenger with out the cb? Do the CB buttons do anything with the radio. If not, I am thinking about having a vinyl graphic made to cover the old one and have it like this:
ON               ACCEL/RESUME

OFF                SET/DECEL

And using the switches to run my new Rostra Cruise that I am going to install.

[Cattman]

Yes, you can talk to passenger w/o cb. Must have the headphone symbol in the dash display and then there is a volume adjustment for the mike and seperate adjustmetn for the headphones. If someone else dosen't answer first I'll look at mine when I get home and post.

[Hoser]

You can get a owners manual from HDL, in thier replacement parts micro fiche, lt's all in there.  hoser  

[71dartswinger]

Looks like it is a little more complicated than I thought....
http://www.rattlebars.com/valkfaq/schematics/rpage10i.html

[Friagabi]

Well you already have he wiring diagram for the radio switch. I have both the radio and CB. So I made up a switch pod for the rostra all electric cruise I installed on my IS. The cruise is set up for normally open switch as the normally closed factory ones started to act up after the first wet season. Never had a problem since using some MOPar switches. If you are able to tap into the radio pod then you can modify the MOPar switches to work. Drop me an e-mail.

[71dartswinger]

email sent, thanks