fork seal driver

[steeldust]

what size is the fork seal driver tool for an interstate? need to order one and where is the best place to find one?

[Ratdog]

I forget who had it... but, someone did up a "how to" for making the seal driver from some PVC pipe scraps from the plumbing dept.  Let's see if someone sounds off with that little jewel.

[Gryphon Rider]

Here's what I used:

http://www.rattlebars.com/vtx/forktools.html

[Ratdog]

That's the one I was thinkin' of.      

[Steve K (IA)]

Yep, that is what I used.      You don't need no stinkin' expensive Honda tool.
The main thing is to get the oil seals installed with the correct end pressed into the tube.  Those seals will leak like crazy if you put them in backwards.  A few of us have first hand experience.

[asfltdncr]

Here's what I used:

http://www.rattlebars.com/vtx/forktools.html

That's a coupling my brother.

[Gryphon Rider]

That's a coupling my brother.

Right you are.  We'll have to hassle Chet at Rattlebars about his picture.