News:

If you're new to this message board, read THIS!

Main Menu
VRCC Calendar Ad

i/s oil filter

Started by N0tac0p, Mon 19, Apr 2010, 05:16:01

Previous topic - Next topic

N0tac0p

when i have gone to the auto store and asked plus reviewed the books myself, it appears the i/s is a different filter than the other valks.  I would like to have a chrome one, but am worrie dabout which brand/# i should use based on the above.  any thoughts?

tlanz

It is my understanding that ALL Honda engines can use the same filter. The only difference is the filter length (which I don't believe is an issue for the I/S). The automotive filters are an inch or two longer than the MC version, but, otherwise work equally well and are usually much cheaper. My local auto dealer runs filter specials every now & then: 6 for $30; works for me since we've got a Civic, an Accord and the Valkyrie.

Mr.BubblesVRCCDS0008

I've been running the walmart ST6607 for over 100k on my bikes.I think good oil and changing every 5k is a key to long engine life.

Hoser

emgo chrome will work with either, HDL or JCW.  hoser
I don't want a pickle, just wanna ride my motor sickle

[img width=300 height=233]http://i617.photobucket.com/albums/

N0tac0p

is that an aftermarket chrome cover you are talking about?

98valk

#5
Quote from: N0tac0p on Mon 19, Apr 2010, 05:16:01
when i have gone to the auto store and asked plus reviewed the books myself, it appears the i/s is a different filter than the other valks.  I would like to have a chrome one, but am worrie dabout which brand/# i should use based on the above.  any thoughts?


http://www.jkozloski.com/generic_parts.htm

the GL1800 is using a shorter filter due to fairing interference, although I have used the longer one used by the valkyrie and GL1500.
So due to the GL1800 it seams all of the honda filters are now being made shorter. I have even found that the ST3593A and Purolator PL14459 are also shorter now but still larger in Dia than stock. The larger Dia ones are all I use, more filtration area and longer life.

I always paint my filters silver to match the engine.


1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798

Red Diamond

I use a Mobil-1 (M-110) filter, it is longer than most filters and doesn't interfere with anything. My chrome oil filter cover is a little short, but that is the extent of any issue. Those filters are the same for any year Valkyrie. When you go to the dealer, they go through that what year, what model crap, pay not attention to it.

If you are riding  and it is a must that you keep your eyes on the road, you are riding too fast.

tbone

I use the K&N 303c filter- It is the chrome version. runs around $17 delivered to my door from
the K&N store.- Tbone. 

K&N FILTERS STORE
http://store.knfilters.com
1455 CITRUS ST
RIVERSIDE, CA 92507

wiggydotcom

I think the KEY question here for those of you running an "alternative" filter is:

Will a cut off MGD can still fit over it?  :2funny:
VRCC #10177
VRCCDS #239

Hoser

Not the ST3593A!   ;D  hoser It adds a little more oil capacity, though.
I don't want a pickle, just wanna ride my motor sickle

[img width=300 height=233]http://i617.photobucket.com/albums/