Forward Controls & Aftermarket Foot Peg Fitment

[RUDE DOG - Steelers]

Need to get some shifter/brake pegs and set of foot pegs for my forward controls from BBT.  Im assuming these should work.  Will either of these pegs also work to replace the stock driver and passenger pegs? 
http://www.kandgcycles.com/27-1657.html
http://www.kandgcycles.com/27-1658.html
http://www.kandgcycles.com/27-1659.html

[RUDE DOG - Steelers]

Cmon, nobody?????

[hubcapsc]

Maybe nobody has tried what you're looking at, but who's to say you can't make them work?

I've never seen anyone just bolt on a set of forward controls and go, everybody makes some personal
modifications... I think Truck Racer made all new control arms for both sides... I followed Frank Smoak's
lead and cut the footpeg mounting bars right off my forward controls, and used Kuryakyn 4050's mounted
at the curve on the lower engine guard and then I used shifter pegs from (?) for my pedals...
I've gotten to like the peg for the shifter, and I'm going to try a whole kuryakyn footpeg as my
brake pedal, I've got most of what I need to give it a go...

This shows the cut-off peg mount, and the 4050's...



This shows what I used on both sides for pedals...



This shows how I think the forward controls intrude into the lean angle, and could
be dangerous in a steep lean...



-Mike

[RUDE DOG - Steelers]

I have the forward controls from Big Bike Things, nothing homemade.  I have the Interstate or mid controls.  Want to know if the pegs I linked to will work with those controls.

[judd]

I don't see any reason why they wouldn't work,  Shifter/ Brake pegs use a 5/16" bolt to mount and the Foot pegs use 3/8" bolts, same as Kury's................. Nice looking pegs !