Valkyrie decals

[Valk1520]

Anyone know where I can get decals for my trailer?  I would really like the Maiden but anything with Honda Valkyrie would work.  Thanks in advance!!

[HayHauler]

Don't know if 6" is big enough for what you want, but these guys are a sponsor of this club.  VRCC

http://f6rider.com/Store/decals.htm

Hay 
Jimmyt

[Chrome]

Hey 1520 I had some  decals of my MaidenHead crest made last year.I wanted the image reversed so the decal was facing forward but the printer reversed the image so the printing was backwards.I sent them back and haven't picked them up yet. Will see this week about them.Only in red Best colour.
If you want a set to try out ,let me know.
Adrian V ValkyrieSwag

[Valk1520]

Chrome, I like the looks, do you have the size?  Depending on size, I am interested, let me know.  Thanks!

[Hook#3287]

I might be interested also, depending on their size.  Let us know.

Thanks;
Bill

[Sourdough]

try this place.. they have a couple of different styles in various sizes. I have this one on my trailer..looks real nice.

http://cgi.ebay.com/ebaymotors/HUGE-Honda-Valkyrie-F6-Decals-Cross-Vinyl-Sticker-Decal-_W0QQcmdZViewItemQQhashZitem2ea7ecec96QQitemZ200385817750QQptZMotorcyclesQ5fPartsQ5fAccessories

[Linedog]

I'm looking for 2 3"+6"s for my side covers.  It seems the previous owner on my bike couldn't remenber the name Dragon so he had it painted on the side covers to remind him. Aggrevates me everytime I look at them.  Linedog  

[Spirited-6]

You might try a shop that makes the mag.signs that go on trucks/ cars.  They have a program on computers that can dup. anything.   

[Chrome]

Hi guys My decals measure 3" tall by 9" wide. I have been quite ill the last few days with a broncial virus and not left the house. If I feel better tomorrow,I will check out my printer. Theses didn't cost me much as I was trying them out so "On the house for a few sets" Stamps are on me to boot.
Adrian

[Willow]

I'm looking for 2 3"+6"s for my side covers.  It seems the previous owner on my bike couldn't remenber the name Dragon so he had it painted on the side covers to remind him. Aggrevates me everytime I look at them.  Linedog  

If you just want to be rid of the paint, it's likely on top of the clear coat.  A careful use of oven cleaner and some rubbing will make it go away.

[scoobydoo]

Adrian, I would love to have a set, just let me know what I owe ya.
Thanks
Scoobydoo

[Hook#3287]

Adrian, I'd like a couple if that can be worked out.   Thanks, Bill

[Dougger]

Adrian,
I will take 2 sets, not free.

[Buster]

If possible I'd like a couple of sets too.

[Big Rig]

Ditto, I would like a couple also.

[Linedog]

Adrian, count me in on a couple of sets if I can pay you for them.  Linedog

[Tx Bohemian]

Anyone know where I can get decals for my trailer?  I would really like the Maiden but anything with Honda Valkyrie would work.  Thanks in advance!!

Looks like some good options here but if you don't find what your looking for give these guys a try:
http://www.westonsigns.com/home.php

They have some "Flame Hog Heads" that I thought were cool and always wanted to order but never did, just didn't get around to it.

I talked to them about making a bigger Suzuki "S" (kinda looks like the superman "S") when I had my C50 so people would stop saying I have a HD copy.  Figured the big S would put a stop to that.
I never did that either but the guy knew what design I was talking about and said they could make a decal of just about anything.  I guess they get the pattern off of the internet.

At the time they were real reasonable on price.

[Valk1520]

Hi guys My decals measure 3" tall by 9" wide. I have been quite ill the last few days with a broncial virus and not left the house. If I feel better tomorrow,I will check out my printer. Theses didn't cost me much as I was trying them out so "On the house for a few sets" Stamps are on me to boot.
Adrian


I'd like 2 sets if possible.  Let me know what you need.  Thanks!!!

[Chrome]

Hi Guys Should have my decals here next week and will send them out.I will have a left and right so if put on a trailer on either side,the MaidenHead will face forward.There are two versions of these decals,one to be stuck on the inside of a window so the image faces out or one to just be applied to the outside of an object.Yes there is a difference.These were printed on a vinyle sheet so the image should be cropped to just outside the lines.
Any one who wants a set or two ,please email me with which set and your address.  swontvrcc@sympatico.ca
And once again,on the house. Sort of payback to a great club.
Adrian ValkyrieSwag

[SCain]

Here is one I bought several years ago, I think it was from F6 Rider Store, maybe with enough interest, they would make some more.

[Linedog]

Willow  Thank you for the tip on paint removal using oven cleaner.  I'll try it when it warms up!  Linedog

[Chrome]

Hi All Just got my decals in today(Slow Printer) and they will be put in the mail tomorrow.The ones that have proper writing are ones to be put on the outside and the ones with reversed lettering are to go inside a window with the Valk head facing foward. Since these were all printed on a large piece of vynle,please crop to the image using an exacto knife.I would of but I am too old to do it .
Enjoy Adrian

[Cliff]

Hi All Just got my decals in today(Slow Printer) and they will be put in the mail tomorrow.The ones that have proper writing are ones to be put on the outside and the ones with reversed lettering are to go inside a window with the Valk head facing foward. Since these were all printed on a large piece of vynle,please crop to the image using an exacto knife.I would of but I am too old to do it .
Enjoy Adrian

Hey,, what's this talk about being too old????  No way....  you're still young at heart!  How you doing Adrian?

[Momz]

Adrian,
I'd love one of those red with the maiden head facing to the right.

Please PM for cost and address to send to.

Thanx Momz

[Valk1520]

Hi All Just got my decals in today(Slow Printer) and they will be put in the mail tomorrow.The ones that have proper writing are ones to be put on the outside and the ones with reversed lettering are to go inside a window with the Valk head facing foward. Since these were all printed on a large piece of vynle,please crop to the image using an exacto knife.I would of but I am too old to do it .
Enjoy Adrian



I got them today!!  Thanks again and please let me know if I can return the favor in any way.

[Quicksilver]

I received mine today , thanks again Adrian.

[Hook#3287]

Adrian;

Got my decals today, they look great.  Thanks again.

Bill

[Momz]

Adrian, you are most the best!

Adrian sent me both left and right Maidenhead Valkyrie decals at no charge. What a guy!
I owe you at least a drink at the next PD13.

Happy trails
Momz

[Big Rig]

Adrian,

Thank you, they look AWESOME.

Ride safe brother.

Thank you
Dave

[Redline +]

Received mine also, thanks Chrome!

Redline

[PhredValk]

I think I'll wait to see Chrome's stuff in person, in Niagara Falls or London this summer.
Fred.

[Bama Red]

Adrian, got mine in the mail yesterday. Man are those beautiful! They're sure gonna look good on the truck!

Thanks, pardner!

[Chrome]

Hi All Just put the last of my "On the House" decals in the mail. I sent out 38 pairs. I will have the rest listed in my ValkyrieSwag site when I come back from my VRCC display at the Toronto Spring Bike Show this weekend. I hope all enjoy those decals. I thought they looked pretty good myself.
Happy Trails Adrian(Chrome)V

[Sodbuster]

Got the decals in the mail .... Look superb !!  Thanks Adrian !!  If we hook up sometime I'll buy ya a cold one