Valkyrie Riders Cruiser Club
September 24, 2025, 02:24:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Radiator cap?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Radiator cap?  (Read 1917 times)
Mr.BubblesVRCCDS0008
Member
*****
Posts: 3025

Huffman, Texas close to Houston
« on: April 09, 2011, 06:16:11 AM »
 Just found out I need a new cap. The rubber seal is torn. It looks like the one from a gold wing of the same years will fit, also the part numbers are the same. I can't believe it's worth 32. dollars at local dealer is there something else that will fit. I ride this bike everyday  so I don't what to wait for long to order online HDL price is 25 bucks. TIA
Logged
TearlessTom
Member
*****
Posts: 485


Spanish Fort, AL.
« Reply #1 on: April 09, 2011, 06:24:22 AM »
Don't know what else would fit but I was looking at one for my Yamaha Tour Deluxe the other day and it was the same price.

I think it is about 32mm. You might measure it or take it to your local auto parts place and compare side by side.
Logged
OverdueBill
Member
*****
Posts: 420


Elkmont, Alabama
« Reply #2 on: April 09, 2011, 09:21:54 AM »
That's about what I gave for a chrome one.  The quality doesn't seem as good as OEM but it's chrome so I'll try it.  How important is that PITA set screw?
Logged
TearlessTom
Member
*****
Posts: 485


Spanish Fort, AL.
« Reply #3 on: April 10, 2011, 09:29:27 AM »
Mine has the chrome cap. Didn't know there was a set screw until now.
Logged
Mr.BubblesVRCCDS0008
Member
*****
Posts: 3025

Huffman, Texas close to Houston
« Reply #4 on: April 10, 2011, 09:56:13 AM »
Thanks to all of ya'll for the help. BnB Tom thanks for all the options. I'm picking up a stock one for a 92 accord today on the way home from work. I order this one because I like the look of it but it won't be here for three days. The two togeter was still less than the stock . replacement.http://www.autozone.com/autozone/accessories/Spectre-14-to-18-lbs-pressure-rating-chrome-billet-radiator-cap/_/N-261t?counter=1&filterByKeyWord=radiator+cap&fromString=search&itemIdentifier=536831_0_0_
Logged
aslondon
Member
*****
Posts: 63


VRCC #4321

Monticello, Fl
« Reply #5 on: April 10, 2011, 05:57:09 PM »
Let us know how it works.  Looks kind of cool

Al
4321
Logged
Mr.BubblesVRCCDS0008
Member
*****
Posts: 3025

Huffman, Texas close to Houston
« Reply #6 on: April 12, 2011, 04:13:23 PM »
Sorry everybody got mine in today and it is way too big for the valkyrie. I tried the spectre website for the correct one but no luck. Cry
Logged
3fan4life
Member
*****
Posts: 6988


Any day that you ride is a good day!

Moneta, VA
« Reply #7 on: April 12, 2011, 06:54:24 PM »
Quote from: Mr.BubblesVRCCDS0008 on April 12, 2011, 04:13:23 PM
Sorry everybody got mine in today and it is way too big for the valkyrie. I tried the spectre website for the correct one but no luck. Cry


My gasket started leaking a couple of years ago, I didn't want to pay $30 for a new cap either.

I carried the cap into Autozone and matched it up with an automotive cap that fit for about $7.

That cap couldn't handle the pressure, it leaked around the flip top, So I took the gasket from it and put it on the Valkyrie cap and it's been doing fine.  
Logged
1 Corinthians 1:18
jdp
Member
*****
Posts: 448
« Reply #8 on: April 14, 2011, 06:12:49 PM »
you can go to an auto parts store and pick one up for 5 bucks its a STAT cap
Logged
Hoser
Member
*****
Posts: 5844


child of the sixties VRCC 17899

Auburn, Kansas
« Reply #9 on: April 15, 2011, 01:49:32 PM »
Tossed the set screw first time I took the cap off, 82000 miles ago.  Hoser
Logged
I don't want a pickle, just wanna ride my motor sickle

[img width=300 height=233]http://i617.photobucket.com/albums/
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS