Carb sync, whats your numbers?

<< < (3/3)

FLATSIX:
What to do then for obtaining the best performance if the idle-drop procedure will not give this?

When you turn each screw 2.1/4 turn out without the motor running, then there must be a difference from carb to carb I guess - or not?

So the best is to perform the turning with running motor at 900 rpm and then adjust each screw to max. rpm - how much turns will this give approx.?

With this procedure will it be close to 100% you think - now the Lady runs good, but I think it will be better if pilots are set optimal for each carb - or not?

I hesitate before starting to turn at the machine..... :angel:

Navigation

[0] Message Index

[*] Previous page