Wiring explanation needed...

[PharmBoy]

On the schematic of Chets START SWITCH SAFEGUARD.  Does the blue/white wire connected to #86 terminal on the relay connect with the black/red wire as does the added lead that connects to the 30/51 terminal?  Thanks for your help...Jim ???

[tank_post142]

the drawing shows a connection in the bottom left, but i believe that represents the start switch.
otherwise the relay would be engaged all the time and it would never disengage during start process.

[PharmBoy]

The way it is drawn up didn't make sense to me.  That "connection" in the lower left portion of the schematic was what I was asking about.  I have done this one other time on a Tourer, but could not remember exactly how it was done...Jim

[tank_post142]

that "connection" appears to be the part of the switch that is normally closed and opens while the start switch is engaged.

[PharmBoy]

Thanks!...Jim