What size new shocks?

[Toledo Mark]

I have a 99 Standard set up for solo.  I am 6'1" about 225lbs, 34 inch inseam.  I still have the original shocks on my Valk and would like to replace them with Progessives. 

I would like to raise it (the seat) about 1 inch higher. (Originals already set on highest setting)

What shock does anyone recommend and what length?

Thanks,  Mark

[gordonv]

If your ride is fine, then why not just add an air bladder (forget what they call those cushions) and "sit on it".

[JaysGone]

Mark
I dont think you can go higher.
13 inches for shocks is max I believe.
Im new to the bike and could be mistaken.
I just took off a set of Progressive 440s.
Very stiff ride even on the softest settings for me.
I put on a set of OEM Monday on the middle 3rd setting.
Rides not a heck of alot different to me.
Still stiff but a bit more rebound.
Same weight as you, solo setup too.
I have to get a spanner wrench so I can try the OEMs on 1 and 2.

If I put on my double seat that raises me up a bit more.
The stock solo seat I have is good for me but Im 5'10 with a 30 inseam.

[sandy]

With your height/weight I'd get Progressive 13" 440 HD's. The spring rate will raise the rear a bit but you'll appreciate the ride and improved handling in the corners.

[hubcapsc]

With your height/weight I'd get Progressive 13" 440 HD's. The spring rate will raise the rear a bit but you'll appreciate the ride and improved handling in the corners.

+1 

I don't have experience with them, but people also really like Works Performance shocks,
and there's a VRCC supporting vendor who sells those... http://www.xf6-custom.com/

-Mike

[Brian]

If your ride is fine, then why not just add an air bladder (forget what they call those cushions) and "sit on it".

Air Hawk is the air bladder cushion, I use one on the driver seat and the passenger pad.

[Dano]

Same set up here, Progressive 440's 13".  At 6'2" and 205, it will raise the rear end of the bike about an inch which gives you a little more clearance in the twisties.  Since I ride sole and have the back seat removed, I had to send the Progessive shocks back a few times to get things right.  The HD shock was too stiff for solo, so I had them heat treat the spring.  All is well for over 15 years.

Dan

[JaysGone]

Same set up here, Progressive 440's 13".  At 6'2" and 205, it will raise the rear end of the bike about an inch which gives you a little more clearance in the twisties.  Since I ride sole and have the back seat removed, I had to send the Progessive shocks back a few times to get things right.  The HD shock was too stiff for solo, so I had them heat treat the spring.  All is well for over 15 years.

Dan

My 440s are also going back.
I hope they will put in the regular spring.
With the HD spring commutings a bit on the harsh side.

Mark
The 440s are a bit on the high end of things but they may be for you.
Id look into the 412s too.
Similar and a heck of alot less expensive.
Ive been reading the Progressive site and there is alot of options there.