Inzane 17

temperature indicator light

Started by baffled, Thu 28, Jun 2012, 22:42:01

Previous topic - Next topic

baffled

98 standard;temp indicator light quit working.does not come on when key is turned on.can anyone point me in the right direction.all pointers,tips & info greatly appreciated. thanks

jer0177

This (from the shoptalk) shows you how your tach looks when disassembled:


The bulb part number is listed here: http://www.rattlebars.com/valkfaq/schematics/rpage11.html

Hoser

The temperature light is only on when the bike overheats, it does not normally come on when you turn on the key.  Hoser
I don't want a pickle, just wanna ride my motor sickle

[img width=300 height=233]http://i617.photobucket.com/albums/

shooter64

Quote from: Hoser on Fri 29, Jun 2012, 05:48:51
The temperature light is only on when the bike overheats, it does not normally come on when you turn on the key.  Hoser

Thanks, I meant to ask about that. The oil light comes on and the stand light, if it is down, but not the temp light.
Columbia, S.C.

Patrick

Your post indicates that the light use to come on with the key.. Huumm, regardless,, Hoser is right..

michaelyoung254

If you're want to check to see if the indicator light is working, you should be able to disconnect the temperature sensor at the sensor, and then short the temperature lead to ground. Grounding the lead should cause the indicator light to come on.
1998 Standard - Pearl Sedona Red & Ivory Cream




indybobm

I thought the service manual says that it will come on for one or two seconds when the key is turned on. There is a good diagnostic checklist on case it does not come on. It might be 97, 98 only.
So many roads, so little time
VRCC # 5258