Inzane 17

Wrench Party - Saturday, September 22, 2012

Started by chauffeur, Sun 02, Sep 2012, 11:11:46

Previous topic - Next topic

chauffeur

So, it's time for a ride to Mansfield.  Come on down (or up, or east, or west) !!!     

We'll start at 9:00 and go til whenever.   Food and refreshments will be provided.     

If you plan to attend, please post to this thread what you want/need to do and PM Chauffeur for the address and directions.

I do know that Ebony (as dubbed by Hollyday) will be getting progressive fork springs installed.




Hope to see y'all there!


Valkpilot

Quote from: chauffeur on Sun 02, Sep 2012, 11:11:46
So, it's time for a ride to Mansfield.  Come on down (or up, or east, or west) !!!    

We'll start at 9:00 and go til whenever.   Food and refreshments will be provided.    

If you plan to attend, please post to this thread what you want/need to do and PM Chauffeur for the address and directions.

I do know that Ebony (as dubbed by Hollyday) will be getting progressive fork springs installed.





Hmmmmm....

I was going to desmog the black bike, but it also needs new front springs (I've had all the parts for over a year.)   If you're doing fork springs, maybe I will too.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

WDAN

Would like to install my Stebel horn. Be good to go with no more mods that I can think of. :laugh: :laugh:
WDAN
Irving, TX

Admiral

Your bike looks awesome - very classic shot.

I've been toiling away at work to pay for my addictions, and hope you are all doing well.  Rode my 1990 Honda CBR1000F Hurricane 275 miles this morning with the BMW Fort Worth club, had a great ride despite the heat.  Will bring it to the next monthly meeting...watching for the announcement for date / time / location...

Planning on making the wrench party on the 22nd; appreciated all the help at the mini-wrench a few weekends ago.  The new center stand is nice to have in the garage, fer sure.

Be safe out there - looks like another week of broiling, then a welcome break on Saturday.
KEITH VAUQUELIN
Lewisville, TX

89 Pontiac Firebird Formula 350 'Blackhawk'
90 Honda CBR1000F Hurricane 'Independence'
01 BMW F650 Dakar 'America'
01 Honda GL1500CF Valkyrie I/S 'Enterprise'
05 BMW K1200LT 'Kitty Hawk'
05 Triumph Tiger 955i 'Republic'
09 Kawi Concours 14 'Constellation'

Disco

Count me in.

I don't have anything major to do, but I do have a couple of minor electrical tasks that need to be straightened out (cigarette lighter adapter & 4-way flashers).  Or, if electrical is not the theme of the day, I have another minor task that will require extra hands, minds, and some advance planning...

Thanks, chauffeur!  Thanks, passenger!
2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 07 Helix
71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

BuzzKill

I'll likely be there.  I have a sneaky suspicion I'll be doing some rear fender re-wiring.  Seems the Falken is too tall with my current setup.  More details to come, back to my vacation.

5_19

I might even make this party! The only thing that I might need help with is my audiovox cruise control if I don't get it fixed ahead of time!  :cooldude:


Most motorcycle problems are caused by the nut that connects the handlebars to the saddle.

IBA # 45723
2001 Honda Valkyrie Standard (Sold after 9 years)
2009 BMW R1200 GSA

RainMaker

I won't be there but hope everyone has a good time.


2005 BMW R1200 GS
2000 Valkyrie Interstate
1998 Valkyrie Tourer
1981 GL1100I GoldWing
1972 CB500K1

chauffeur

Time for a head count. 

Currently looks like 5 or 6 (VP, WDAN, TJ. Disco, ThagAndy, Admiral).

Anyone else? 


Six Guns

Looks like I should be able to make it.    :cooldude:
99 Valkyrie Interstate VRCC Member # 17,369


BnB Tom


Timbo

My plan is to attend just to distract everyone.  :-\

BuzzKill

Looks like I wont be able to make it this time.  I've had a kidney stone since before Inzane.  I'm finally having a shockwave treatment and the soonest they can do it is Saturday. 

Disco

Quotethe soonest they can do it is Saturday
Sooooo, what's the hurry?   :evil:
2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 07 Helix
71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

Valkpilot

#14
Quote from: Disco on Wed 19, Sep 2012, 19:50:24
Quotethe soonest they can do it is Saturday
Sooooo, what's the hurry?   :evil:

Yeah.  Pull up your Hello Kitty Huggies and come to the wrench party.  Disco and I have an ultrasonic cleaner you can sit in.  It's just like what the doc will do, only different.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

BuzzKill

Cheaper too I'm sure.  Do I at least get clean fluids?  Oh, they aren't Hello Kitty.  They're Star Wars. 

Valkpilot

Quote from: ThagAndy on Wed 19, Sep 2012, 20:18:33
Cheaper too I'm sure.  Do I at least get clean fluids?  Oh, they aren't Hello Kitty.  They're Star Wars. 

Mine are Spidey.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

Hollyday

"Mine are Spidey."

I would have thought you were a SpongeBob kinda guy.

Christbiker

Mine are Depends (at my age)  I'm a prolly if I don't go to Arkansas or work.  Need bushings and rear brake pads.
HE>i

Valkpilot

Quote from: Hollyday on Wed 19, Sep 2012, 20:25:59
"Mine are Spidey."

I would have thought you were a SpongeBob kinda guy.

Pffffffft.  Spongebob.  That woudl be juvenile.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

Disco

QuotePffffffft.  Spongebob.  That would be juvenile.
But absorbent.   :D
2000 Bumblebee Tourer, 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K, 07 Helix
71 MT50 Trailhopper


VRCC 27,916                  IBA 44,783

BuzzKill

My appologies chauffeur on taking this thread off the "deep end".

Valkpilot

Quote from: ThagAndy on Wed 19, Sep 2012, 21:03:37
My appologies chauffeur on taking this thread off the "deep end".

If your end is that deep, it might not fit in the ultrasonic bath afterall.
VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

Valkpilot

#23
For nor'enders,  by my count, these folks:

Tom
Disco
Admiral
Woody
not Thag

and anyone else interested, let's meet for breakfast at Tierney's on Main in Lewisville, then ride down together.

Let's meet at 0700 and head for Chauffer's around 0800.

Tierney's Cafe
208 E. Main Street
Lewisville, TX

http://www.tierneyscafeandtavern.com/

VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

Baron

I would like to attend but it all depends on work.
Ride safe,

Baron
VRCC 28275
2000 Valkyrie Interstate
2023 Road Glide Limited
2022 KLR 650

Houdini

I hope to make it, I have a fog light out and can't figure out why yet.

Yes, I checked the bulb.
"A Camera And A Bike....What More Do I Need?


Valkpilot

VRCC #19757
IBA #44686
1998 Black Standard
2007 Goldwing 
 
   

Houdini

"A Camera And A Bike....What More Do I Need?


lucky_1_chris

I'm in. It's our anniversary this weekend, so I'll probably head out about 4ish. I'll see you guys in Lewisville for breakfast. Looking forward to it.
1999 Valkyrie Interstate

2016 Victory Cross Country Tour

BnB Tom

Quote from: Valkpilot on Wed 19, Sep 2012, 21:12:32
For nor'enders,  by my count, these folks:

Tom
Disco
Admiral
Woody
not Thag

and anyone else interested, let's meet for breakfast at Tierney's on Main in Lewisville, then ride down together.

Let's meet at 0700 and head for Chauffer's around 0800.

Tierney's Cafe
208 E. Main Street
Lewisville, TX

http://www.tierneyscafeandtavern.com/



Could happin  :)

HayHauler

I wish I could ride up for this one, but will be working on the phat gerl Saturday....  clutch time.

Y'all enjoy and I will see ya next time.

Hay  8)
Jimmyt
VRCC# 28963

5_19

 ??? What happened to last Saturday? All parts didn't show up?


Most motorcycle problems are caused by the nut that connects the handlebars to the saddle.

IBA # 45723
2001 Honda Valkyrie Standard (Sold after 9 years)
2009 BMW R1200 GSA

HayHauler

Yea, that's it....

I'll have help this time.

Hay 8)
Jimmyt
VRCC# 28963

SideCar

Hate to miss this one. Got the ovarian cancer walk tomorrow with the family.  Might try to get by in the afternoon. 

Hay, I'll be real interested to hear how the clutch job goes down south. Mine's not slipping yet, but it's lost a lot of friction zone play and no amount of bleeding has helped restore it.
2000 Standard with Texas Sidecar 2 seater
Come Ride to Save a Child's Life http://www.curethekids.org/rideforkids/

Red Diamond


If you are riding  and it is a must that you keep your eyes on the road, you are riding too fast.

Westsider

Going to miss a good day and goo d food I know,,but have fam plans made already,  yall have a good one, I really need a new front tire to,, 12k on my current metz, and is now starting to handle like it... no complaints on the wear, installed at 8k and going to turn 20 any day now...Watch out for the cell phones n texters... :cooldude:

The black bike looks  :cooldude: :cooldude:   is that your to chauffer Dave?
we'll be there when we get there -   Valkless,, on lookout....

SideCar

Quote from: Red Diamond on Fri 21, Sep 2012, 10:09:31
Any way I can watch this job Jimmy?


Watch it? Heck, video it for us inquiring minds.   :cooldude:
2000 Standard with Texas Sidecar 2 seater
Come Ride to Save a Child's Life http://www.curethekids.org/rideforkids/

HayHauler

Quote from: Red Diamond on Fri 21, Sep 2012, 10:09:31
Any way I can watch this job Jimmy?
I was hoping to help with you're carb sync.  Maybe we can do them at the same time.  But Mark is sick and I don't know if we can get the gauges before .

Hay 8)
Jimmyt
VRCC# 28963

Christbiker

Looks like I'll be able to attend this party.  Had work in Kilgore today and took the Valk.  What a great way to go to work.  Rolled 350 miles and definetly need to install the bushings.  See those fortunate ones tomorrow at breakfast. 

Disco, want to meet up 0n 380 somewhere then go to Lewisville?

Blessings
HE>i

Wanderer

#39

I would look at the relay under the right side cover. Well, you will have to do more than look at it! Though the original above looks like an oem kinda skinny relay thang, it is replaceable from a local car parts store, or at least it was back in '08 or '09. Easier to check under load (google or have VP work his magic), or just buy a new one to try rather than digging out the bulb for sure and lots cheaper than the mc dealer. If it is not the relay, you now have a spare, Chuck.

Anybody need their deck refinished? Looks pretty good, eh! I do hire out. ~Jeff


DOH!  That's why I need youse guys to look 'er over.
[/quote]
More Valk Pics...

had a couple of Valks once upon a time
2004 DRZ400S
2005 GS1200  
1978 CB550K
1977 CB550F