|
OzarkRider
|
 |
« on: April 17, 2013, 08:48:32 AM » |
|
I attempted to machine a version of the Cobra Light bars and they turned out OK but not quite right. Would like to find an old set that I could reverse engineer and try again. If anyone would be willing to part with an old pair I would make them a new set as a thank you. Note: They wouldn't look exactly the same, wouldn't want to a call a from a patent attorney. message me if your interested.  http://www.cruisercustomizing.com/cobra-billet-lightbar-valkyrie-97-99/part/BLV4-0140 |
|
|
|
|
Logged
|
97 Valkyrie Tourer
83 V65 Magna
VRCC #34495
VRCCDS #00269
"You god-cursed, mean, dirty, son-of-a-bitch!"
"I wouldn't make it a habit of calling me that, son."
"Stole It From A Whore House In Creede"
|
|
|
|
OzarkRider
|
|
« Reply #1 on: April 17, 2013, 08:59:31 AM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
|
|
|
|
|
Logged
|
97 Valkyrie Tourer
83 V65 Magna
VRCC #34495
VRCCDS #00269
"You god-cursed, mean, dirty, son-of-a-bitch!"
"I wouldn't make it a habit of calling me that, son."
"Stole It From A Whore House In Creede"
|
|
|
hubcapsc
Member
Posts: 16802
upstate
South Carolina
|
|
« Reply #2 on: April 17, 2013, 09:19:50 AM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike |
|
|
|
|
Logged
|
|
|
|
hubcapsc
Member
Posts: 16802
upstate
South Carolina
|
|
« Reply #3 on: November 12, 2013, 04:51:25 PM » |
|
Mr. Rider...
Did anything ever come of this project?
-Mike
|
|
|
|
|
Logged
|
|
|
|
mmurffy03
Member
Posts: 791
03 standard
toms river new jersey
|
|
« Reply #4 on: November 13, 2013, 02:52:53 PM » |
|
did you see these a VRCC member in poland makes these cobra light bar arms I think he made a mold of a original and pours a set then plates them somehow I speak to him a lot he just got scammed by a guy here in the states sent him 4 grand for a bike and never got it see the post I made named Valkyrie owner scammed he makes other parts also are you going to machine your copys out of steel and plate them or alloy of some sort ? with out the ridges on the top of them ? with or with out the light switch and holes for just the light and skip the blinker part to make it easier and just sell the arms the guy in Poland just sells the arms you buy your own lights let me know what you might do I have a original set on my bike is what you are looking to do is borrow a set return them and give a copy set as a fee ? mmurffy01@hotmail.comhttp://www.ebay.com/itm/Honda-Valkyrie-COBRA-light-bar-lamps-/171172683489?pt=Motorcycles_Parts_Accessories&fits=Make%3AHonda%7CModel%3AValkyrie&hash=item27daafdee1&vxp=mtr |
|
|
|
|
Logged
|
|
|
|
mmurffy03
Member
Posts: 791
03 standard
toms river new jersey
|
|
« Reply #5 on: November 14, 2013, 01:12:21 PM » |
|
not perfect at all but not bad knockoffs for a out of production item another different polish guy makes knockoff rattlebar kick shifters but he says they are NOS but they aren't he makes saddle bag racks and some other stuff to he has somebody stitching up interstate bras that are fakes also
|
|
|
|
|
Logged
|
|
|
|
hubcapsc
Member
Posts: 16802
upstate
South Carolina
|
|
« Reply #6 on: January 18, 2015, 07:44:45 AM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike |
|
|
|
|
Logged
|
|
|
|
|
Bighead
|
|
« Reply #7 on: January 18, 2015, 08:58:56 AM » |
|
I hope so it has been 2 years  |
|
|
|
|
Logged
|
1997 Bumble Bee
1999 Interstate (sold)
2016 Wing
|
|
|
Smokinjoe-VRCCDS#0005
Member
Posts: 13846
American by Birth, Southern by the Grace of God.
Beautiful east Tennessee ( GOD'S Country )
|
|
« Reply #8 on: January 18, 2015, 10:38:10 AM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike He was last active 12/5/14.... Good luck with that Mike....Two years and nothing one would think you got ripped....Let's hope not. |
|
|
|
|
Logged
|
 I've seen alot of people that thought they were cool , but then again Lord I've seen alot of fools. |
|
|
hubcapsc
Member
Posts: 16802
upstate
South Carolina
|
|
« Reply #9 on: January 18, 2015, 02:44:52 PM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike He was last active 12/5/14.... Good luck with that Mike....Two years and nothing one would think you got ripped....Let's hope not. Let's not say ripped... all kinds of things could have happened... perhaps the project didn't work out and the part is dusty and forgotten on the shelf... life throws us stuff that's more important than half a lightbar with a scratch on it all the time... a little help remembering can't hurt anything...  -Mike |
|
|
|
|
Logged
|
|
|
|
|
The emperor has no clothes
|
|
« Reply #10 on: January 18, 2015, 03:38:39 PM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike He was last active 12/5/14.... Good luck with that Mike....Two years and nothing one would think you got ripped....Let's hope not. Let's not say ripped... all kinds of things could have happened... perhaps the project didn't work out and the part is dusty and forgotten on the shelf... life throws us stuff that's more important than half a lightbar with a scratch on it all the time... a little help remembering can't hurt anything... -Mike Very noble of you  . Hope he sees this thread. |
|
|
|
|
Logged
|
|
|
|
Smokinjoe-VRCCDS#0005
Member
Posts: 13846
American by Birth, Southern by the Grace of God.
Beautiful east Tennessee ( GOD'S Country )
|
|
« Reply #11 on: January 18, 2015, 04:02:57 PM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike He was last active 12/5/14.... Good luck with that Mike....Two years and nothing one would think you got ripped....Let's hope not. Let's not say ripped... all kinds of things could have happened... perhaps the project didn't work out and the part is dusty and forgotten on the shelf... life throws us stuff that's more important than half a lightbar with a scratch on it all the time... a little help remembering can't hurt anything... -Mike Very noble of you . Hope he sees this thread. Mike is a good guy.... Two years and nothing is a rip even if he see's this and has a change of heart. |
|
|
|
|
Logged
|
I've seen alot of people that thought they were cool , but then again Lord I've seen alot of fools. |
|
|
|
The emperor has no clothes
|
|
« Reply #12 on: January 18, 2015, 04:21:33 PM » |
|
I really only need one, to use as a pattern.
If you aren't interested in trading, want to sell I may be interested if the price is right.
I have one (I forget which side) I'd be willing to loan you... it has a tiny blemish on the top - so tiny I didn't see it in the picture when I bought it. I have the main part, that is... I don't have the little back part where it clamps to the forks... -Mike Howdy... any luck on reproducing a set of cobras from that one I sent you? -Mike He was last active 12/5/14.... Good luck with that Mike....Two years and nothing one would think you got ripped....Let's hope not. Let's not say ripped... all kinds of things could have happened... perhaps the project didn't work out and the part is dusty and forgotten on the shelf... life throws us stuff that's more important than half a lightbar with a scratch on it all the time... a little help remembering can't hurt anything... -Mike Very noble of you . Hope he sees this thread. Mike is a good guy.... Two years and nothing is a rip even if he see's this and has a change of heart. I'm with you I'm hoping he had a senior moment and forgot about it. BTW I've had nothing but great dealings with all our members (including the bags I bought from you a couple years back) |
|
|
|
|
Logged
|
|
|
|
|
