Getting extra keys cut

[Sharkey]

When I got the Valk she only came with one key. I need to get extras. What generic key blanks will fit the Valk? TIA

[Warlock]

I went to the local Honda shop and they cut me one there.
David

[Bone]

I used a DC3 it's for a Mitsubishi (sp). Read about them on this board. The guy at a Ace hardware store didn't want to cut it so I bought the blank, ask him to try and if it didn't work it was my problem
It worked.

[DeathWishBikerDude]

http://cgi.ebay.com/ebaymotors/Honda-Logo-Motorcycle-ATV-Blank-Key_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a4Q7c39Q3a6Q7c72Q3a1240Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a200QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3a503759e2QQitemZ250453907938QQptZMotorcyclesQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/Honda-Shadow-VTX-Rebel-Valkyrie-Nighthawk-Magna-key-A_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a6Q7c72Q3a1240Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a25QQ_trksidZp3286Q2ec0Q2em14QQhashZitem45ecd2a2ecQQitemZ300325970668QQptZMotorcyclesQ5fPartsQ5fAccessories

If you have the Honda key,stamped with the key code,a lock smith can cut you a key.
Most hardware stores today,have a dumb computer operated electronic machine,incapable of making a short key like the Honda.
The Stealer will probably want $15 for a key.
I'd rather support a local locksmith,who will charge you about $3.

If you like the Honda branded key,buy the blank,and have it taken with you to the local smith.

[fudgie]

My Ace hardware had honda MC key blanks. Cut me one for less then $5.

[chrise2469]

I've always gotten ilco x84 hd74 when I get my keys cut at a locksmith for 4 bucks.

From online sources equivalent blanks are
Curtis HD74
  ESP HD74
  Jet HD74
  JMA HOND-4l
  Silca HON39
  Star HN5
  Taylor X84

Hope that answers your question.

[junior]

some yamaha kes are the same blank, the # i had cut was YH38

[Smokinjoe-VRCCDS#0005]

Mitsubishi DC3 will work I've had a few cut from this blank . The last one cost about $1.00 cut and out the door.ACE Hardware.